User Tag List
Results 1 to 10 of 24
Thread: No Brakes
-
04-22-2021, 04:07 PM #1
- Join Date
- Jul 2020
- Location
- Msryland
- Posts
- 7
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
No Brakes
Have a 2020 Reflection 315. The electric brakes are not working. Have had both plugs replaced, trailer and truck. Ford dealer has replaced the brake controller. Did not help. Dealer then connected a different truck to the trailer and still nothing. Both trucks show a "trailer wire fault". All other lights on the trailer work. Turn, brake and lights. The only thing not working are the trailer brakes. In reviewing the wiring diagram, it shows a 400a in line fuse. Does anyone know where the fuse is located? Any other suggestion would be very helpful. Thanks
-
04-22-2021, 05:35 PM #2
There shouldn't be a fuse on the brake wires.
2018 Reflection 315RLTS
2023 F350 Lariat 6.7L/CC/LB/FX4
-
04-22-2021, 06:52 PM #3
The trailer wiring fault message on a Ford means there is a short on the trailer brake circuit and will not apply power to the brakes in that case.
Have you recently replaced wheel hubs or anything? Maybe a wire got pinched and now is contacting the frame. Also could be an issue with your break away switch failing. If you have a multimeter, you can start troubleshooting.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
04-22-2021, 06:58 PM #4
Trailer-side issue. Sounds like someone does not know how to actually troubleshoot trailer brakes. Start at the junction box for the trailer umbilical. Connections are notoriously poor there. Then check the connections at the backing plates. Also notoriously problematic.
Last edited by geotex1; 04-23-2021 at 07:17 AM.
Rob & Nikki + Cloverfield
2020 Grand Design Solitude S-Class 3350RL
2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN
Mountains of Pennsylvania
-
04-23-2021, 06:13 AM #5
- Join Date
- Feb 2021
- Posts
- 579
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
I have had to fix wiring for the brakes on my trailer. I found several pinched/frayed wires (all near the axle). First thing I would do, is get under the trailer, and start from the plug and trace the wires, looking for obvious issue's. Usually, the fault is not in the brake drum. After that, the multi-meter would come out.
2023 Chevy 3500HD CC SB 4x4 Dmax
2021 GD 320G with 8K axles
-
04-23-2021, 07:24 AM #6
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Two very easy and quick checks to see if RV brakes are working are:
1. with truck disconnected pull emergency brake disconnect pin... RV brakes should all lock up and you can hear a slight hum if you
listen at the hubs of both axles
2. With a multi meter measure on the RV 7 way connector at pins 1 and 2 with MM is OHMS scale... Resistance should read around 1.6ish ohms of resistance
You are measuring thru the RV 7 way plug wiring back to ALL FOUR magnets which are wired in parallel.. if this reading is different then
you will need to remover the two wires on the back side of each brake backing plate and measure the resistance of each Brake magnet
Each one should measure around 3.8 ohms .. if these all read good then your issue is between the RV 7 way plug wiring back to where each
brake magnet wire branches off from the main feed line
-
04-23-2021, 07:47 AM #7
- Join Date
- Oct 2020
- Location
- Southern Arizona
- Posts
- 638
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Mike & (RIP Karen)
2021 Imagine 2600RB
2011 Toyota Tundra 5.7 RW, Tow Package
Husky Centerline WDH
Champion 2500DF, Prodigy P2
-
04-23-2021, 07:52 AM #8
- Join Date
- Mar 2015
- Location
- Central Cal
- Posts
- 3,236
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
Another area to check is where the wires go in and out of the axles. Many installers are not careful and the wires get "stripped" as they are pulled through the holes causing a short.
Jim (& Sharon)
2015 GD Momentum 385TH - SOLD
For Sale - 2015 Ford F-350 DRW 4x4 Lariat w/ AirLift bags, Titan 65 gal. OEM replacement fuel tank.
The toy:
2017 RZR XP 1000 EPS SE
-
04-23-2021, 07:52 AM #9
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
You will hear the brake magnets hum because if the magnet coils
-
04-23-2021, 07:55 AM #10
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
If the OP has a clamp on amp meter he can also measure amp draw at each magnet to verify operation of that brake
Reupholstered RV Furniture
Today, 05:40 PM in General Discussion