Slide Out gets Stuck

[Bobgias]

I have a 2021 310RLS. When I retract the slide all the way it seems to bind and get stuck. When I want to put the slide back out I push the button and it just makes a clicking sound and it wont go back out. There is a 3/4" nut at the opposite side of the slide for manual operation. If I turn that 3/4" nut a half turn it seems to loosen up the slide and then the motor will push it out. Does anyone have any idea what could be causing this..

[CoChris]

I have a 2021 310RLS. When I retract the slide all the way it seems to bind and get stuck. When I want to put the slide back out I push the button and it just makes a clicking sound and it wont go back out. There is a 3/4" nut at the opposite side of the slide for manual operation. If I turn that 3/4" nut a half turn it seems to loosen up the slide and then the motor will push it out. Does anyone have any idea what could be causing this..

I see you are (relatively) new here. First welcome. This is a great group of people. I have replied to your other post requesting you include your make (I assume Reflection), model year, and which slide or slides so people can better help you.

One forum tip, please do not create duplicate posts. It is much easier to follow a thread if all the information is in one post. This is both for your benefit and for others that may have similar issues now or later.

Chris

[mowjeaux]

Did you ever get a solution to this problem. Mine is doing the same thing. TIA

[Soundsailor]

Did you ever get a solution to this problem. Mine is doing the same thing. TIA

Hey @mowjeaux, it looks like you're new here. Welcome to the forum. There are many experienced RVers here who can help you through many issues. You'll need to offer a bit more information though. Like what model do you have? How long has this been going on?

[mowjeaux]

This seems like a great group you have here. I have a 2021 Transcend 265BH. Bought new 2/2021. Problem started 3 months ago. Appreciate any information you have on this.

Thanks again!