We just picked up our new 2910BH last Friday. Took it out for a couple days locally to shakedown. Found some small things but all easily fixed myself. The big issue is with the dual AC units. I've read there's been a lot of issues with the Furrion temp sensors but mainly with the heat function. Our issue is with the AC. The room temperature reading itself is obviously off but the main issue is if I run the front AC the rear thermostat in the bedroom reads between 40 and 55 degrees(Room Temp). If I turn everything off and let the thermostat temp come back above 60 on the bedroom thermostat(so it will at least kick on), the front thermostat will begin reading a room temp of 40 to 55 degrees? Makes no sense....I'm wondering if I have a combination of the room temperature sensors needing to be pulled down through the filter in addition to crossed wiring between my front and rear units? Taking back to the dealer tomorrow to investigate.