XLS Suspension?

[Hitsman3]

Wanting to add either the Road Armor equalizer or the MORryde CRE3000. Seems like the Road Armor is out of stock the places I've looked, so figure i'll go with the CRE3000. Only question i have is with the hanger. On the XLS's the hanger is different than all the other pics I've seen with those that have upgraded the equalizer on other models. Has anybody with an XLS done this upgrade or would anyone know if this can still be done? Or am i stuck with the crap equalizer that's on it. Trying to help smooth out the ride. According to MORrydes web site it says the hanger must be 3" wide. Our's is 1-3/4" but everything else is ok. I did try calling them but i forget that not everybody is on west coast time & they were already closed.

[Redapple63]

Doesn’t look too different, looks like an extended hanger that potentially is meant for height adjustability. Either should work fine on your rig. The extended bracket however may lend itself to more lateral movements. Some strengthening may do it good for longevity, even if you don’t upgrade.


Sent from my iPhone using Tapatalk

[Stealth13777]

https://www.mygrandrv.com/forum/show...er-E-Z-Flex-vs

Post number six indicates that it may not work. I am interested in doing similar to my xls and was set on the e-a flex but now interested if you receive a different answer - tbh the morryde seems like a nicer product.

[tfgd21bhe]

Morryde installed the cre3000 on my 2020 21bhe last spring. It has the same hanger as your photo. However they said they were not able to install the x-factor cross members. I've been very happy with the cre3000's. Trailer definitely tows smoother.

[AZMike]

Morryde installed the cre3000 on my 2020 21bhe last spring. It has the same hanger as your photo. However they said they were not able to install the x-factor cross members. I've been very happy with the cre3000's. Trailer definitely tows smoother.

Mine is in the shop right now getting the CRE3000, heavy duty shackles, wet bolts, and X-Factor installed. I am also having them weld reinforcements on the spring hangers. They are doing a mod to the X-Factor because the drain pipe for my gally dump hangs below the Coroplast. I don't see any reason why these same additions and mods can't be done on a 22RBE. Maybe you just have to find the right trailer business.

[Hitsman3]

Mine is in the shop right now getting the CRE3000, heavy duty shackles, wet bolts, and X-Factor installed. I am also having them weld reinforcements on the spring hangers. They are doing a mod to the X-Factor because the drain pipe for my gally dump hangs below the Coroplast. I don't see any reason why these same additions and mods can't be done on a 22RBE. Maybe you just have to find the right trailer business.

I think your spring hangers are different than what the XLS has on them. The MORryde qualifcation guide says hanger must be 3" wide, mines about 1-3/4". Send some pics when yours is done, i would like to see it.

[AZMike]

I think your spring hangers are different than what the XLS has on them. The MORryde qualifcation guide says hanger must be 3" wide, mines about 1-3/4". Send some pics when yours is done, i would like to see it.

My long overdue suspension upgrades. CRE3000, heavy duty shackle kit with wet bolts, X-Factor (with modification to clear low hanging galley dump pipe), and boxed in spring hangers. My trailer guys did a superb job!

[Hitsman3]

Morryde installed the cre3000 on my 2020 21bhe last spring. It has the same hanger as your photo. However they said they were not able to install the x-factor cross members. I've been very happy with the cre3000's. Trailer definitely tows smoother.

You have any pics you can post? Did they have to modify your hanger before install?

[tfgd21bhe]

You have any pics you can post? Did they have to modify your hanger before install?

I don't have any pics at the moment but can get one in a few days. To my knowledge Morryde did not have to modify my hanger and it looks like the one in your photo.

[Hitsman3]

So i called MORryde and they requested I send pics. This was their response, seems to me like this would weaken the spring hanger unless i'm missing something any thoughts?