Recliner lights

[jjradtech]

My wife decided she wants the lights for the seats( heat,vibrate,lights) unplugged. They plug into a recep behind one of the recliners. Can I pull the recliner out to unplug them or are they secured to the floor? I might be able to take long stick maybe broom handle and unplug them.
TIA

[OurNewEra]

My wife decided she wants the lights for the seats( heat,vibrate,lights) unplugged. They plug into a recep behind one of the recliners. Can I pull the recliner out to unplug them or are they secured to the floor? I might be able to take long stick maybe broom handle and unplug them.
TIA

The recliners should be anchored/screwed to the floor and will not move. I laid down next to them and reached back to unplug mine. A yard stick or something should work as well.

[Second Chance]

Everything related to the recliners runs off the same 120VAC->DC power supply. I unplugged the the DC connector to the lights and vibrators so that the recliners and heaters still work. I did this while I hand them unscrewed from the floor to remove the center armrest/drink holder.

Rob

[JCR GD]

If you reach over the back while reclined you should be able to reach the plug.

[wjpatter]

I liked this solution that someone else posted on another thread.
https://www.thingiverse.com/thing:45...ZRxgZV-HHSAFwc

[Bungy]

My wife decided she wants the lights for the seats( heat,vibrate,lights) unplugged. They plug into a recep behind one of the recliners. Can I pull the recliner out to unplug them or are they secured to the floor? I might be able to take long stick maybe broom handle and unplug them.
TIA

FYI, if you unplug the AC the chairs won’t recline. The heat, lights and massage all separately plug into a harness under/behind the chair. I’ve had to replace both the heat and lights in one of mine. Here’s a picture of the connector for them:



The chairs are secured to the floor but only by two #8 Robertson screws, one in each front corner of the frame. Recline the chair to gain access, then tilt the chair on its front.