375res and progressive hw50c

**dano50023** · 05-06-2021, 01:05 PM

I was wondering if anybody has put the hw50c in a 375res.
I have a 2021 on order and wasn't sure of the location of the breaker panel.
My friend just received an Alliance 5ver and there was no room for him to install so had to go with an external one.
I have already purchased the ems so that got me to thinking about the possibility of that same problem with the 375res.
Would appreciate any info.

**bertschb** · 05-06-2021, 01:35 PM

Welcome to the forum!

I don't have a Solitude 375RES but every Solitude I've seen has a similar basement space. In the photo below from my Solitude 310GK-R (which looks very similar to my Reflection and my previous Solitude) I have removed the rear basement wall from the pass through storage (aka "basement"). This is looking from the passenger side basement door. There is a shelf where my factory converter/charger was installed. I used this shelf to mount my EMS but you can mount it wherever you want.

The install is technically very simple. The challenge is working with the very stiff 6/4 wire in a cramped space. I simply cut mine and "spliced" the EMS in. No need to purchase any additional wire if you mount it directly inline. If you want to relocate the EMS to a different location, you'll likely need more 6/4 wire.