User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
Thread: Almost dialed in
Hybrid View
-
05-11-2021, 08:57 AM #1
-
05-11-2021, 10:00 AM #2
- Join Date
- Jun 2020
- Location
- San Antonio
- Posts
- 175
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Could try one, or if your bars are not quite parallel move the brackets up a notch. If you can get to a flat surface measure the distance to the top of the front wheel to see if you can get the front end back to the unloaded height or a little above.
-
05-11-2021, 10:38 AM #3
- Join Date
- Sep 2018
- Location
- Woodstock
- Posts
- 3,649
- Mentioned
- 60 Post(s)
- Tagged
- 0 Thread(s)
Bars are good. I am thinking of trying just one. Likely all it needs. Problem is that it is a pita to hook on to the trailer
It is roughly 1/2 inch higher than unloaded
2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew2021 Imagine 2400 BH
2018 GMC Sierra 4x4 Crew 1840lb payload
Trying to get trailer camera wire...
Today, 10:01 PM in Electronics