Vanity sink replacement

**Rgpracer** · 05-11-2021, 09:08 PM

My 2020 230RL is stainless with a terrible faucet. I was/am going to change it, but went to Camperland today and the new RV's have a heavy plastic like sink in it with a nice faucet. We don't like the metal sink anyway, so, want to change it for the new style sink and a faucet like the newer 5'rs. I know I can change the faucet for anyone, but, will sink be equally as easy to replace?

I saw a like sink on etrailer....looks the same, any advice will be appreciated.

Always something to "make better".

Thanks

**Second Chance** · 05-12-2021, 08:17 AM

Can you provide us a link to the sink on eTrailer so we can see what you're talking about? I think the "newer" sinks you're talking about are like the one in our 2020 Solitude - a cast resin. It has its drawbacks, too...

Rob

**Rgpracer** · 05-12-2021, 08:31 AM

Originally Posted by Second Chance

Can you provide us a link to the sink on eTrailer so we can see what you're talking about? I think the "newer" sinks you're talking about are like the one in our 2020 Solitude - a cast resin. It has its drawbacks, too...

Rob

Now i cant find it....only one I see is a 20"×17" and believe its to big.

**Rgpracer** · 05-12-2021, 08:32 AM

Originally Posted by Second Chance

Can you provide us a link to the sink on eTrailer so we can see what you're talking about? I think the "newer" sinks you're talking about are like the one in our 2020 Solitude - a cast resin. It has its drawbacks, too...

Rob

What issues are with that one Second?

**Second Chance** · 05-12-2021, 10:25 AM

Originally Posted by Rgpracer

What issues are with that one Second?

Ours came with a couple of molding defects in the form of some shallow pitting. The sink manufacturer sent me a repair kit (color matched), but the defects were not deep enough to get good coverage for color. It's only a cosmetic issue, though. My main concern is that the sink is, obviously, much softer than the stainless steel, so it might be less durable. If I had stainless steel, I'm not sure I would swap it out for one of the resin sinks.

Rob

**Rgpracer** · 05-12-2021, 03:29 PM

Originally Posted by Second Chance

Ours came with a couple of molding defects in the form of some shallow pitting. The sink manufacturer sent me a repair kit (color matched), but the defects were not deep enough to get good coverage for color. It's only a cosmetic issue, though. My main concern is that the sink is, obviously, much softer than the stainless steel, so it might be less durable. If I had stainless steel, I'm not sure I would swap it out for one of the resin sinks.

Rob

Well Rob, the CEO has decided we are changing the faucet and leaving the sink.
Thanks Sir and thanks for your service.....i was 6 years Army, 18 years AF
Started as 68B, ended up Crewchief/Gunner on UH-1H's.

**Second Chance** · 05-12-2021, 03:38 PM

Originally Posted by Rgpracer

Well Rob, the CEO has decided we are changing the faucet and leaving the sink.
Thanks Sir and thanks for your service.....i was 6 years Army, 18 years AF
Started as 68B, ended up Crewchief/Gunner on UH-1H's.

Haha! I was 2 years AF then 25 years Army - kinda the reverse. My AFSC was 9756 (if I can remember back that far). Army MOS was 66H8A.

Rob