brand new trailer with caulking issues?

[pchop6t9]

This is the one I got. Just want to make sure I'm not using a sealant that isn't compatible with GD membrane. I heard of certain sealant not being compatible or void warranty....

This is the one I got.

https://drive.google.com/file/d/14gu...w?usp=drivesdk

[pchop6t9]

Awesome thank you. Any advise for applying it other than clean with mild detergent and water allow to dry and apply?

[NB Canada]

This is the one I got. Just want to make sure I'm not using a sealant that isn't compatible with GD membrane. I heard of certain sealant not being compatible or void warranty....

This is the one I got.

https://drive.google.com/file/d/14gu...w?usp=drivesdk

There likely isn’t any reason for you to touch the roofing material anyway


2021 Imagine 2400 BH
2018 GMC Sierra 4x4 crew

[TSeck954]

Question is why hasn't the dealer addressed this? Looks like something sliced a hole in the membrane. While I love our trailer, I've found that whoever was responsible for QA before it left the factory was asleep that day. Not impressed with some things that were either patched, or fit and finish is less than I'd expect for a Solitude.

[pchop6t9]

Dealer addressed it but super busy. I got the caulking and patched it myself along with a bunch of bubbles as well on the roof that I popped and recaulked

[Redapple63]

Awesome thank you. Any advise for applying it other than clean with mild detergent and water allow to dry and apply?

There is a primer you need to use to help adhesion. Dicor Ultra Sealant Primer can be purchased on Amazon and is good for EPDM and TPO roofing materials.


Sent from my iPhone using Tapatalk

[WhittleBurner]

The wood on the roof expands and retracts with the weather leaving lines, wrinkles or bubbles. All that is normal. I would not make a practice of popping
(putting holes in roof) the bubbles and caulking. If anything could void the roof warranty putting holes in the membrane on purpose could.

[pchop6t9]

The bubbles were in the caulking and they were rather large. There was approximately 2 of them. When u popped it there was a large void. The bubble was paper thin. I didn't make a hole in the membrane. You still suggest to leave it?

[pchop6t9]

I didnt want to run the risk if a small branch falling and popping it.

[pchop6t9]

The bubbles were in the caulking and they were rather large. There was approximately 2 of them. When u popped it there was a large void. The bubble was paper thin. I didn't make a hole in the membrane. You still suggest to leave it?...