User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 7 of 7
  1. #1
    New Member
    Join Date
    Jan 2021
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Steadyfast on an 2021 Imagine 2910BH

    Hi Everyone,
    I recently installed the steadyfast on my 2910BH, my concern is that the back stabilizers are a bit low when the footplates are attached. There is a roughly 12" clearance to the ground. Maybe 1-1.5" inches lower than before.

    The original mounting spot of the stabilizers is on the bumper bracket. So I'm wondering if I should move them forward and mount the stabilizers directly to the frame.

    Before it seemed like they were pretty close to scraping, although they haven't yet. Just worried that I'm going to leave the whole thing in a drive way somewhere.

    Thanks for any input

  2. #2
    Seasoned Camper
    Join Date
    Jan 2018
    Location
    Boiling Springs, SC
    Posts
    172
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Can you post some picks of it on the rear? I have the JT Strong arm system so I need to see to compare.


    Sent from my iPhone using Tapatalk
    2018 GD 2800BH
    2005 Tundra, 2010 sequoia
    Wife & 2 kids

  3. #3
    New Member
    Join Date
    Jan 2021
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Click image for larger version. 

Name:	IMG_3311.png 
Views:	26 
Size:	465.6 KB 
ID:	34167

    I will have to reconnect it back up to the truck to see the exact ride height. But I'm almost positive it will be right around 12". I think I might move the stabilizers forward and off the bumper bracket and onto the frame. The only problem with that is that its 20" up. I would need a healthy amount of blocking.
    Attached Thumbnails Attached Thumbnails IMG_3311.jpg  

  4. #4
    Seasoned Camper
    Join Date
    Jan 2018
    Location
    Boiling Springs, SC
    Posts
    172
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Steadyfast on an 2021 Imagine 2910BH

    I was able to mount mine to the back of the bumper because I could weld the brackets to it. And it made it to where I can still store the stinky slinky, hard to tell if you can do the same?


    Sent from my iPhone using Tapatalk
    Last edited by Callahan4; 05-17-2021 at 07:52 AM.
    2018 GD 2800BH
    2005 Tundra, 2010 sequoia
    Wife & 2 kids

  5. #5
    Seasoned Camper
    Join Date
    Sep 2019
    Location
    Shelton, Wa.
    Posts
    190
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    For what its worth, it looks about the same as mine & I haven't had any issues.
    Jason & Jamie
    2016 F150 Lariat Supercrew 4x4, 5.0L, 3.55
    2020 Imagine XLS 22RBE
    The Great PNW!

  6. #6
    New Member
    Join Date
    Jan 2021
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    What is the clearance of yours, and how far back from the wheels are they? Thanks a bunch in advance.

  7. #7
    Seasoned Camper
    Join Date
    Sep 2019
    Location
    Shelton, Wa.
    Posts
    190
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    I will check on Saturday as we keep our trailer at a friends house as we don't have room on our city lot. I will be installing the MORryde CRE3000 so I will check then and let you know. It did lower ours around 1-1/2"-2" I would say after the install. We've taken it out twice since install, about 200 mile round trip both times and haven't had an issue.
    Jason & Jamie
    2016 F150 Lariat Supercrew 4x4, 5.0L, 3.55
    2020 Imagine XLS 22RBE
    The Great PNW!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.