User Tag List
Thanks: 0
Results 1 to 9 of 9
Thread: Reflection Wheel Bolt Size
-
05-13-2021, 03:52 PM #1
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Reflection Wheel Bolt Size
Doe anyone know the size of the wheel studs, not the nuts, on the Reflection 5th Wheels/ I used a 12 pt socket(big no no) and rounded off a lug nut. Probably screwed up the lug because the nut will spin but will not come off the stud.
Last edited by BobLandry; 05-13-2021 at 03:54 PM.
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
-
05-13-2021, 04:00 PM #2
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
-
05-13-2021, 04:23 PM #3
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I got that far, but there are different knurl diameters and lengths. I guess I'll have to call Dexter with the axle number
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
-
05-13-2021, 06:21 PM #4
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
I misread, since this looks like a lighter FW, probably different axles & brakes.
I had replaced some studs on a Dexter 12x2" drum several years back. Dexter Studs 2-13/16" Total Length. 2-5/8" under Head to Tip of stud.
DEXTER 1/2"-20 Press-In Wheel Stud #007-262-00 - https://www.easternmarine.com/dexter...tud-007-262-00
https://www.dexteraxle.com/product/2...studs-press-inLast edited by gbkims; 05-13-2021 at 06:27 PM.
- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
-
05-13-2021, 08:22 PM #5
Are you sure you just didn't bugger up the cladding and that's what is free spinning? It cinches on right above the conical seat. You should be able to hammer on a properly sized 6-point impact socket and take the lugnut off.
If you need a replacement lugnut, I will send you one (or up to 32) for the price of postage.Last edited by geotex1; 05-13-2021 at 08:24 PM.
Rob & Nikki + Cloverfield
2020 Grand Design Solitude S-Class 3350RL
2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN
Mountains of Pennsylvania
-
05-14-2021, 08:14 AM #6
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the off and I'll keep you in mind. I have a couple of more things to try. I have a set of rounded lug nut removal sockets on the way.
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
-
05-14-2021, 08:33 AM #7
-
05-14-2021, 08:41 AM #8
- Join Date
- Feb 2018
- Location
- SW Colorado
- Posts
- 2,696
- Mentioned
- 42 Post(s)
- Tagged
- 1 Thread(s)
I believe Rob is correct. Its the nut cover that is spinning. I know you have special sockets coming but take a 6 point one and try now. I have heard of folks cutting the nut cover off (dremel tool) to get to the nut and then using an undersized 6 point socket - usually metric to get the nut off.
Good luck - post back on what the issue is.2018 Reflection 150 Series 220RK 5th wheel with 6K axle upgrade. B&W 25K OEM Companion, Steadyfast system, 2022 F350 SRW 6.7 King Ranch 8' bed, Trailer reverse lights, rear spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, and Solar
-
05-18-2021, 05:31 PM #9
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
Need help with Imagine 2600 RL
Today, 10:46 AM in General Discussion