User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
-
05-15-2021, 10:59 AM #1
- Join Date
- Feb 2021
- Posts
- 5
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Adding a cable drain valve on fresh water tank
I previously read that someone added a cable drain valve replacing the factory dump underneath and behind the street side axle. They used a 48” cable and fitted the handle to one of the holes in the leveling strut. I have tried to locate his post which included pictures. Can anyone guide me to that post. Really appreciate any help. I plan to make this change on our 2021 Reflection 337 RLS. THANK YOU.
Last edited by NormWilliams; 05-15-2021 at 02:54 PM. Reason: Misspelling.
-
05-15-2021, 11:53 AM #2
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
It should be pretty simple.The holes in the strut brace are easily accessible. Tou just need a pull cable.
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
-
05-15-2021, 04:49 PM #3
- Join Date
- May 2019
- Posts
- 117
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Are you referring to replacing the entire valve or just the handle? If you are replacing the valve, I wouldn't use one made of ABS, such as those used on the grey and black tanks. As far as I know, ABS is not approved for potable water use, and should not be used on a fresh water tank, unless it's downstream of the PVC dump valve already in place.
-
05-16-2021, 06:53 AM #4
- Join Date
- Feb 2021
- Posts
- 5
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yes, to changing dump valve to one with a cable to the handle that would mount on one of the extra holes on the leveling strut. This is the valve from Amizon that I ordered. LaSalle Bristol 66N11AB48GM Waste Valve 1-1/2" Slip & Hub. I appreciate caution regarding the material compatibility with drinking water. I’m going to see what material it is. Thanks again for your help.
-
05-19-2021, 10:58 AM #5
I took the economical approach to reaching my fresh tank dump valve. I bent a piece of aluminum rod from my scrap pile into a shepard's hook that is about 2' long. I can easily push or pull the T handle on the valve, and for storage, I hang it on my wet bay panel.
2019 2970RL
2020 F250
-
05-20-2021, 11:19 AM #6
- Join Date
- Feb 2021
- Posts
- 5
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the idea. It seems like we often don’t think outside the box. I appreciate your response.
Charging Lithium Batteries From...
Today, 05:43 AM in Electrical System and Wiring