User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
Thread: Relays?
-
05-27-2021, 06:56 AM #1
- Join Date
- Mar 2018
- Location
- Old Hangtown
- Posts
- 119
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Relays?
Inside the front compartment of my 328M, next to the genny, is 5 relays under a black cover. I was having issues with my main slide stopping part way out and in. A call to a mobil mech. found that the bottom relay was the culprit. Does anyone know what the other 4 relays are for? A schematic would be helpful but getting one from GD is next to impossible.
2022 Silverado Duramax/Allison 2500 HD
2018 Momentum 328
2018 Polaris RZR
2005 Polaris Sportsman 500
-
05-27-2021, 10:54 AM #2
Those arent relays. They are self resetting 12V circuit breakers. One will goto the hydrualic pump, it's best to replace this with an 80A circuit breaker, GD started doing this at some point, helps with hydrualic issues. Other wires goto various circuits, one is for the factory disconnect switch, others you will have to figure out as there is no standard on how GD wired your unit. One of those wires on the upstream side is for the break away switch.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
05-27-2021, 11:47 AM #3
- Join Date
- Mar 2018
- Location
- Old Hangtown
- Posts
- 119
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the info. I meant to say circuit breakers. Don't know how I got relays.
2022 Silverado Duramax/Allison 2500 HD
2018 Momentum 328
2018 Polaris RZR
2005 Polaris Sportsman 500
-
06-25-2022, 08:40 AM #4
- Join Date
- Feb 2019
- Location
- Montréal
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Which one out off the five did you replaced ?
-
06-25-2022, 08:53 AM #5
- Join Date
- Mar 2018
- Location
- Old Hangtown
- Posts
- 119
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
On mine it was the bottom one.
2022 Silverado Duramax/Allison 2500 HD
2018 Momentum 328
2018 Polaris RZR
2005 Polaris Sportsman 500
-
06-25-2022, 11:45 AM #6
- Join Date
- Feb 2019
- Location
- "Murvul", TN
- Posts
- 3,435
- Mentioned
- 138 Post(s)
- Tagged
- 0 Thread(s)
That one is normally the auto reset breaker for the hydraulic pump motor, and needs to be an 80A....or you will eventually have trouble with it again in the future. One of the others is a breaker that is inline from the converter/charger 12 volt for battery charging. Another on on mine is the power being supplied to the Schwintek slide in the bedroom, and the other one is for the break-away switch for the trailer brakes.
2016 F350 CrewCab Dually
2018 Momentum 394M...Heavily Modded!
2023 Suzuki GSX-S1000 GT+
Excessive Payload is a Wonderful Thing
"If it ain't fast....It ain't Fun"
Which brand/website did you buy...
Today, 08:53 PM in General Discussion