User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
Thread: Poor fit around fender
-
04-17-2015, 08:39 PM #1
- Join Date
- Feb 2015
- Location
- Phillipsburg, Ohio
- Posts
- 70
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Poor fit around fender
There is another thread going on that is basically the same as this. It appears that everyone is just settling for this as normal. I do not see any response from Grand design concerning this.
As you can see from the photo of our 337RLS, the lower right corner of the dining room slide looks to be bent out and there is a significant gap. The shroud sticks out and catches the wind. Eventually, the wind and vibration is going to cause this to crack and blow off.
Out dealer tells us this is normal and the best they can do. The claim all of the grand designs are this way. Seriously? This is not a low end trailer. Is this the best fit that we can expect?John & Jill
(5 Dachshunds and 1 confused Pit Bull - Moose, Barney, Spanky, Willie, Guri and Brixx)
2015 Reflection 337RLS
2011 F350 Lariat DRW, 6.7L PSD
Phillipsburg, Ohio, USA
-
04-18-2015, 06:51 AM #2
- Join Date
- Dec 2014
- Location
- S.E. Wisconsin, Pell Lake (Genoa City)
- Posts
- 316
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Your Photo did not make it through.
My 337 probably looks the same way according to your description.Mike & Pat Clawson
Marty & Bucky (Welsh Corgis)
2015 Grand Design Reflection 337 RLS #2813
Titan Disc Brakes, Liberty Rider Suspension
2005 Chevy Silverado 2500HD Duramax/Allison
Comfort Ride Hitch, 52 Gallon Titan XXL Fuel Tank, Banks Speed Brake, Firestone Air Lift Bags
http://i1383.photobucket.com/albums/...pst4uyouma.gif
-
04-19-2015, 03:00 PM #3
- Join Date
- Feb 2015
- Location
- Phillipsburg, Ohio
- Posts
- 70
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Yeah we are sitting in a campground and I couldn't get the photo to attach thru my phone. I thought I cancelled the post but obviously didn't.
After reading everybody's posts, I think that many of the reflections may be like this. If you look closely you can see that the angle support has a twist to it however. If the twist wasn't there, the fit would be better. It think that this could be corrected but in doing so, may risk cracking the fender shroud.John & Jill
(5 Dachshunds and 1 confused Pit Bull - Moose, Barney, Spanky, Willie, Guri and Brixx)
2015 Reflection 337RLS
2011 F350 Lariat DRW, 6.7L PSD
Phillipsburg, Ohio, USA
Similar Threads
-
Repairing fender skirt
By arhayes in forum Mods and DIYReplies: 3Last Post: 12-14-2016, 09:51 PM -
Loose Fender - Add This Inspection to Your Maintenance list
By TucsonJim in forum FrameReplies: 1Last Post: 07-15-2015, 08:43 PM -
Fender Flap!
By The Duke 316 in forum General Tech TopicsReplies: 1Last Post: 06-08-2015, 08:37 AM -
Fender not cut very cleanly
By hlozano in forum ExteriorReplies: 3Last Post: 05-05-2015, 08:11 AM
Axles Worn Out - What To Do?
Today, 05:43 PM in Axles, Brakes, and Suspension