I have the Tailgater Pro Sat Antenna with the dual outputs for two TVs. I'm using Dish Network with two Wally receivers. All the instructions that I've founds say that during set up to use the Primary output to the secondary TV and set it up first. I complete that setup and all is good and receiving my channels. I then connect the secondary TV to the secondary output port. I connect the primary output to the primary TV and set it up and all is good on both TVs. The issue is you can keep the Wally receivers for shutting off after no use at night. The next morning the primary comes back on and all is good. Secondary TV comes on but most of the channels are not available. Only way to get it back to all channels is to reboot using the primary output signal off the SAT. How do I solve this problem? thanks