User Tag List
Results 1 to 10 of 13
Thread: Slide topers 337rls
-
06-27-2021, 01:44 PM #1
- Join Date
- Jun 2021
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Slide topers 337rls
Want to install towers on the 3 slides anyone have part numbers or length of each slide picking up new rv Friday
-
06-27-2021, 02:09 PM #2
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,119
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
I would recommend calling GD customer service tomorrow - have your VIN from your dealer handy.
Welcome to the forum, too! You can create a signature block with your RV and tow vehicle information (see mine below). That way you won't have to repeat that information whenever you post or ask a question - and others won't have to ask. You can create a signature by going to:
Forum Actions (on menu bar) -> Edit Profile -> Edit Signature (under My Settings on the left)
Happy camping!
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
06-28-2021, 07:24 AM #3
- Join Date
- May 2021
- Posts
- 8
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I found the most luck dealing with etrailer on my slide toppers. I did contact GD, but they said since they do not install them at the factory, they could not recommend the sizes needed to do the job. Mine was on a 29RS
2004 Chevy 2500 HD Duramax
2018 Reflection 29RS
-
06-28-2021, 10:10 AM #4
- Join Date
- Mar 2021
- Posts
- 261
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Keep us posted on your progress. We are looking into the same for our new 337RLS as well. Are you doing the install yourself? We passed on the dealer install as the quote was too high for the work required to install in our opinion. Just using a battery powered blower for now.
Thanks,
Dutchman2
-
06-28-2021, 12:06 PM #5
- Join Date
- Jan 2020
- Posts
- 509
- Mentioned
- 9 Post(s)
- Tagged
- 0 Thread(s)
I had the dealer install the toppers on my 337rls. The 2 road side toppers are standard installs. For the topper above the dinette is different. Because that slide has an awning the dealer had to order a special bracket and a specific length. Keep in mind the clearances on that side are very tight. The slide Topper and front main awning has a clearance of 1/8" so measure twice before installing the topper brackets.
Charles and Susan
2021 Ram 3500 Laramie, 6.4 Hemi, 4x4 CCSB
2021 337rls w/ Andersen hitch.
-
06-28-2021, 12:32 PM #6
- Join Date
- Jul 2020
- Location
- Central Florida
- Posts
- 727
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
In support of what @ckreef said about clearances. On my 2970RL the clearance on the door side is very close with the special bracket. Here is a picture of that setup. Not the same trailer as yours but I'm sure the same configuration with awnings and then throw in the topper.
Point 1 is the clearance between the slide awning and topper bracket. Point 2 is clearance between topper bracket and second awning. The dealer used the low profile bracket on this topper to get some, not much, slope on the topper for water runoff. All though the water doesn't run off much at all. It pools on top of the topper and I have to manually make it run off.
Mike & Lisa
Central Florida
2021 Imagine 2970RL
1996 Chevy K3500 Crew SRW 7.4L Gas
-
07-21-2021, 06:59 AM #7
- Join Date
- Oct 2018
- Location
- Tampa FL area
- Posts
- 254
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I just saw this post and not sure if you are still looking for measurements.
I had a local RV Awning tech installed toppers on all three slides.
The measurements are,
The bedroom slide is 81"
The kitchen slide is 163"
The dinette table is 142"2020 Reflection 337RLS
-
07-27-2021, 07:56 PM #8
- Join Date
- Oct 2015
- Location
- Peoria, Arizona
- Posts
- 560
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I have a 337 and had toppers installed. the installation was completed with a different bracket. the clearance is tight but it will work, just make sure they get it right the first time. i am not sure of the length required.
Jeff & Karen
Peoria, Arizona
-
08-02-2021, 04:24 PM #9
- Join Date
- Jul 2021
- Location
- N. York Pa.
- Posts
- 36
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
bigtimmc, can you send a close up pic of bracket marked with 1. I have same issue.
Sent from my iPad using TapatalkRetired Transportation ,
2015 GMC 2500HD. (6.0L.) Crew Cab. S.R.W.
2021 reflection 320 MKS. With some mod.s
2nd. Rv. And lovin it.
-
08-02-2021, 04:36 PM #10
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,119
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
Use "Reply With Quote" (as I have done here) or tag him with his user name - @Cshyman62 - to get his attention.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
Freezer Opens on Travel Day?
Today, 03:46 PM in Appliances