Major Sagging of Fresh Water Tank

**jdpainter** · 07-16-2021, 08:34 PM

Imagine 2910BH here.

We just returned home to Georgia from an awesome, long trip out west (~ 5000 miles). Noticed near the end of the trip my fresh water drain (which is on a PVC extension in the 2910BH) was sitting near a 40 degree angle.

We got home today so I dropped bottom cover to take look at the tank. You'll notice from the photo that the tank has sagged significantly.

Click image for larger version.

Name: PXL_20210716_221548475.jpg
Views: 52
Size: 97.3 KB
ID: 35470

For reference, this is the part from the GD parts site:

Click image for larger version.

Name: 320048 (Medium).jpg
Views: 31
Size: 82.9 KB
ID: 35471

Clearly the drain should be at the low point and the tank is sagging. It does not appear to be in immediate danger of falling as both lips are above their respective beams which support it.

Any advice here? Obviously I'm going to be contacting GD on Monday. Just wanted to get thoughts here in the meantime. Thanks in advance!

**Ynot4me2** · 07-17-2021, 07:01 AM

Something definitely doesn't look right. Did a brace break? I'd be sending those pics to GD.

Sent from my SM-P610 using Tapatalk

**jdpainter** · 07-17-2021, 12:26 PM

Originally Posted by Ynot4me2

Something definitely doesn't look right. Did a brace break? I'd be sending those pics to GD.

There are two straps. One near the drain low point is not even touching the tank (it's as if it's stretched or something). There's no evidence of any strap ever being installed at the center of the tank.