User Tag List
Results 1 to 9 of 9
Thread: bearing size
-
07-27-2021, 12:12 PM #1
- Join Date
- Nov 2018
- Location
- Tallahassee, FL
- Posts
- 25
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
bearing size
We have a bearing on our 351RLTS which has overheated and we need to get it replaced. Does anybody know what size these bearings are? I don't want to pull it out as once it's out we are stuck and may run off the end of our reservation here.
2019 Reflection 315 RLTS
2014 F350 Crew Cab DRW
(Yeah, it's overkill, but I sure love it when the wind gets blowing...)
-
07-27-2021, 12:16 PM #2
They are pretty standard sizes based on axle capacity. Look at your axle tag and see what the capacity is and then you can shop at any store that sells trailer parts and get the correct bearing. To be 100% sure, you can call the axle mfr and give them your axle S/N and they can give you the correct size.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
07-27-2021, 12:26 PM #3
- Join Date
- Nov 2017
- Location
- AZ
- Posts
- 251
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Kevin and Jennifer
2016 RAM 3500 Laramie Mega Cab CTD Aisin 4x4 SRW
2019 Reflection 28BH (Built 2/2019)
- 78" Theater Seat, Second AC, Dual Pane Windows
- Sailun 235/85 R16 Tires
Blue Ox Super Ride BXR7200 with a Demco Factory Prep Bracket 6099
-
07-28-2021, 05:39 AM #4
Look at the Bearing the numbers are on the face at least they used to be. any dealer or parts house can hook you up
2020 Grand Design Solitude 344GK
B&W Companion 25,000
Disc Brake conversion
3 - X-Factor
MORryde pinbox
2007 GMC Topkick C5500 Duramax 6.6
1 Wife 3 Scotties
-
07-28-2021, 10:23 AM #5
- Join Date
- Jun 2019
- Location
- Franklin,MI
- Posts
- 381
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
I recommend Timken brand for replacement, much better quality than the Chinese bearing you are replacing.
2018 F-250 6.7L Leveled, 35’s.
2019 Imagine 2500RL, 640w Solar, Lion UT1300s, 3000w Inverter
CRE3000, Sumosprings
-
07-28-2021, 11:08 AM #6
If you look at tag on axle,you will find model number and batch number. Lippert or Dexter can supply a sheet with all info on the axle, bearings, seals, brake parts, etc. Once you have this info should you ever get in an emergency situation it is much easier to work with a supplier to get correct parts.
I had a major wheel/brake issue in the middle of nowhere and was able to work with a local trailer parts dealer. It was so much easier as I was able to give them the specific Dexter parts I needed. The parts list and diagrams are a must to carry with you.
I second the suggestion of Timken bearings.2020 Reflection 273MK
-
07-28-2021, 12:24 PM #7
- Join Date
- Jun 2019
- Location
- Franklin,MI
- Posts
- 381
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
I threw an extra inner and outer set in my tool box in the pass though. It’s nice insurance.
2018 F-250 6.7L Leveled, 35’s.
2019 Imagine 2500RL, 640w Solar, Lion UT1300s, 3000w Inverter
CRE3000, Sumosprings
-
07-29-2021, 10:56 AM #8
- Join Date
- Nov 2018
- Location
- Tallahassee, FL
- Posts
- 25
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Dexter build sheet got me all the info I needed. Got bearings ordered for all four wheels for spares. Extending our stay at this park and going to check them all. Checking all the brakes while I'm in there and hoping the axle/drum is still good to go after the heat up.
Last edited by KeDoCruising; 07-29-2021 at 11:26 AM.
-
08-05-2021, 11:58 AM #9
- Join Date
- Nov 2018
- Location
- Tallahassee, FL
- Posts
- 25
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
OK, so I got all the parts, tools and got into the crispy bearing today.
Outer bearing was toast, Inner bearing looked to be pretty good actually.
Pulled the bearings and races off the axle and out of the drum.
Attached are pix of the axle, and the outside axle race.
Not sure if I can just clean up the scratches with emory cloth and install the new bearings or if the axle needs to be replaced.
310GK Bounce When Towing
Today, 11:04 PM in Fifth Wheel Hitching Topics