Dining room slide doesn't close all the way

[hlozano]

Another item to add to my list for the dealer. The dining room slide doesn't look like it closes all the way on the one side. The opposite side is nice and tight. Although I have a couple warranty items to take care of, I must say my Grand Design is the nicest RV I've every owned.

[TucsonJim]

I had both my dealer and Grand Design look at mine. Mine sticks out a little on both sides, but not quite a much as yours. I was told it was normal. I looked at several other FWs on the dealer's lot, and they all were similar. They might be able to adjust it a little bit though.

Jim

[Dave and Monica]

The area you're indicating is the sheet metal fender area which has very little support. It's best to judge the slide fit above that trim line where it's solid wall on both sides. If you're not happy with the fit in the sheet metal fender area, it may be pushed in a bit on the slide side for better fit.

Dave

[hlozano]

Thanks, good to know.

[JustinThyme]

From what I can see in the image it appears to be as Dave mentioned that the sheet metal fender is protruding and not the main body of the slide.