User Tag List
Thanks: 0
Likes: 0
Results 1 to 6 of 6
Thread: Reese Goose Box questions
-
08-26-2021, 09:49 AM #1
- Join Date
- Jul 2021
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Reese Goose Box questions
2017 Reflection 303 rls, 2019 Ram 2500 mega cab diesel 4x4
Bought the unit about a month ago and noticed the trailer was a bit nose high when hooked up and going down the road. Unfortunately I did not measure the clearance between truck bed and trailer. I will measure gap prior to making any adjustments. The height adjustments on the hitch seem straight forward but I wanted to double check prior to attempting. I tried to call Reese but if your not the original purchaser they simply hang up on you during the automated call. Tried to call back and held for 15 minutes for a sales person and never got through. I hope the hitch is better than their service!
Any advice or experiences? Thanks guys
-
08-26-2021, 10:23 AM #2
It is fairly easy to adjust the height. Setup some wood blocking in your truck to hold the hitch in place when you take bolts out. Use the landing gear to adjust the RV height. Before you take the bolts out, remove the break away switch and VIN plate. You will have to drill new holes for the break away switch and VIN plate. Make sure to use a torque wrench on the bolts.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
08-26-2021, 12:39 PM #3
- Join Date
- Jul 2021
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Break away switch and vin plate?
-
08-26-2021, 12:51 PM #4
-
08-27-2021, 09:00 PM #5
- Join Date
- Sep 2020
- Location
- Central Ca
- Posts
- 67
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
As FT4NOW noted, goosebox hangs lower then the wing plates so have to re-drill through the goosebox on the backside of wing plates if you make adjustments from where it is now. Just happen to have a picture of the break away switch and holes left from VIN plate. Didn't put VIN plate back on since the washer was in the way and was secured with some special pin rivets.
2020 GMC 3500 Denali SRW SB Duramax 4x4
2021 Reflection 31MB Goosebox 16k
-
08-28-2021, 09:28 AM #6
- Join Date
- Jul 2021
- Posts
- 22
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks guys
Bottle Jack
Today, 12:29 PM in Frame