User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5
  1. #1
    New Member
    Join Date
    Sep 2021
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Hall effect Sensor for electric motor

    Hi,
    Has anyone been able to find a replacement hall effect sensor for a lippert ground control 3.0 electric leveling motor? I had a tire blow and rip the wires out of the sensor. The motor is fine, just the hall effect sensor (the three smaller wires at the motor.) Id rather
    Not purchase an entire motor when all I need is the sensor.
    Last edited by Eaglesionu; 09-06-2021 at 11:13 PM.

  2. #2
    New Member
    Join Date
    Sep 2021
    Posts
    2
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The trailer is a 2017 grand design Reflection 323BHS. Here is a link to grand design for the replacement motor. https://www.granddesignrv.com/owner-...s/detail/23922

  3. #3
    Site Sponsor Scocciante's Avatar
    Join Date
    Feb 2019
    Location
    R.I.
    Posts
    136
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Call Lippert they are great 574-537-8900
    2020 Grand Design Solitude 344GK
    B&W Companion 25,000
    Disc Brake conversion
    3 - X-Factor
    MORryde pinbox
    2007 GMC Topkick C5500 Duramax 6.6
    1 Wife 3 Scotties


  4. #4
    Long Hauler geotex1's Avatar
    Join Date
    Sep 2019
    Posts
    2,879
    Mentioned
    84 Post(s)
    Tagged
    0 Thread(s)
    I think, unfortunately, you are going to find that you will either need to pull the motor housing off and see if you can figure out who Lippert sources the sensor from or bite the bullet and buy the motor assembly. When myself, GD, and Lippert were chasing gremlins in my GC 3.0 system, I learned very early on the motorheads are considered non-serviceable by Lippert.
    Rob & Nikki + Cloverfield
    2020 Grand Design Solitude S-Class 3350RL
    2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN

    Mountains of Pennsylvania

  5. #5
    Seasoned Camper
    Join Date
    Feb 2015
    Location
    Pasco, Wa.
    Posts
    323
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    If it's just broken wire connections, a competent electronics repair shop may be able to repair it. I have had the Hall effect wires break away on the Schwintek slide motors and got them repaired for $25 compared to a $200 new motor.
    Safe Travels.
    Jim & Gwen
    2015 Solitude 379fl, VIN 573FS4324F1102454
    2011 F-350 SC, DRW, 6.7 PSD, Ride-Rite Air Bags, Pull-Rite 20.5 K
    "You can't get lost if you don't care where you're going"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.