Removing Bedroom Slide Door

[Steve & Sheryl]

on the latest trip the bedroom slider door began pulling out from the hanging bracket. The door/hanger looks like a fairly easy fix, but I couldn't figure out how to remove the door from the track to fix it.

Feels like I am missing something obvious.

Thanks
Steve

[Ynot4me2]

If you look where it's hanging from the rail, there's a lock lever that you have to open. Once open, just lift the door up slightly and slide off the roller. You might have to lower the adjustment to give you enough room.

Sent from my SM-P610 using Tapatalk

[Steve & Sheryl]

Thanks Steph & Lise

I was able to flip the levers with a screwdriver, but still couldn't wiggle the door down. I ended up removing the faceplate and exposing the track (only three screws). After that, everything was easy

[jleonard]

Thanks Steph & Lise

I was able to flip the levers with a screwdriver, but still couldn't wiggle the door down. I ended up removing the faceplate and exposing the track (only three screws). After that, everything was easy

I removed the track from the ceiling, then slid the track away from the door.