4 Season, improvements

[aray8554]

I have a 230RL and was installing my battery bank under the bathroom area and started taking a good look at things
in the pass through area. Not sure why you would have a heat vent there when there are two plastic tubs on either side
and those thin compartment doors to keep the cold or hot out. So I started some upgrades, first the plastic tubs, I cut a piece
of plwood to fit in the bottom of the tub, then I wrapped the outside of it with 3/4 foam board, added a piece of sheet metal over
the foam and secured it on both side to the frame and through the bottom into the plywood. Spray foamed all voids behind the metal.

Then I added a layer of foam board to the inside of the doors, hopefully this will help retain more of the heat and make nthe bedroom floor warmer.