Dometic RM1350SL Light doesn't come on when you open the door

[Flleek77]

Thank you. I'll take a look tomorrow or this weekend.

Well, after taking the door switch cluster out and discovering no power, I went back to the fuses. Sure enough, I found the 5v fust was blown. How I missed this the first time through I don't know. Replaced it and the relay clicked and now the light is working again.

Thanks for the help everyone!

[Redapple63]

Glad you figured it out!

[IBEW Sparky]

Well, after taking the door switch cluster out and discovering no power, I went back to the fuses. Sure enough, I found the 5v fust was blown. How I missed this the first time through I don't know. Replaced it and the relay clicked and now the light is working again.

Thanks for the help everyone!

I believe you meant to say "5 amp" fuse not 5 volt fuse... Glad you found it!

[Flleek77]

You are absolutely correct. I would fix it but don't see an edit option. And it was the 12v 5amp fuse, not the 120V.

[IBEW Sparky]

You are absolutely correct. I would fix it but don't see an edit option. And it was the 12v 5amp fuse, not the 120V.

After you post or reply to someone else's post there is an "Edit Post"button at the bottom of your post to the left of the "Reply" button... BUT unfortunately it's only available for a limited amount of time, maybe a day or two then it's gone. I end up going back and editing most of my posts immediately after I post them... either due to misspelled words on my part or having to correct the "auto correct" function. I didn't want you to think I was being picky... just didn't want someone who didn't know better to look for 5v fuses.