Bathroom sink upgrade

**PapiGG** · 09-21-2021, 03:29 PM

We have an Imagine XLS 22RBE.

Has anyone changed out the bathroom sink and faucet in their late model Imagine? Maybe even the 22RBE?

I'm looking at a surface mount round or oval porcelain sink and a new faucet.

Curious what others have done.

Thanks!

**Ynot4me2** · 09-22-2021, 01:31 PM

We just replaced our faucet with one that was a little higher and reach out more. It was a quick swap.

Sent from my SM-P610 using Tapatalk

**JeffD68** · 09-22-2021, 03:06 PM

Not specific to your trailer, but I replaced the sink and faucet in my Reflection 303.

Click image for larger version.

Name: 20200626_221410.jpg
Views: 205
Size: 97.4 KB
ID: 36809

I went to Lowes armed with a few measurements and came home with these. It was a relatively easy project; remove the old sink/faucet, put masking tape on the counter to avoid chipping when cutting, mark out the new (larger) hole using the supplied template, cut the new hole using a jigsaw, installed the new sink and faucet, reconnected the water supply and drains. The original sink was so small that it was almost unusable.

I upgraded the toilet at the same time to a more residential style.

Click image for larger version.

Name: 20200626_221219.jpg
Views: 154
Size: 93.1 KB
ID: 36810

**PapiGG** · 09-22-2021, 04:45 PM

Nice job in the sink!

**PapiGG** · 09-22-2021, 04:47 PM

Not a bad thought to just replace the faucet. Easier than the whole job....

**Fivecodys** · 09-23-2021, 02:31 PM

Nicely done. Stock sink isn't worth much. Reminds of the bowl we'd spit in at the dentist!

**Joeyivi** · 10-02-2021, 06:32 PM

Would you mind sharing a part or model number on the sink? The one in our 311 is terrible. I feel like I’m constantly mopping water off the counter.

**RoJoSo** · 10-02-2021, 08:13 PM

Originally Posted by JeffD68

Not specific to your trailer, but I replaced the sink and faucet in my Reflection 303.

I went to Lowes armed with a few measurements and came home with these. It was a relatively easy project; remove the old sink/faucet, put masking tape on the counter to avoid chipping when cutting, mark out the new (larger) hole using the supplied template, cut the new hole using a jigsaw, installed the new sink and faucet, reconnected the water supply and drains. The original sink was so small that it was almost unusable.

I upgraded the toilet at the same time to a more residential style.

Very Nice. This has been on my to do list.

**JeffD68** · 10-04-2021, 12:47 PM

Originally Posted by Joeyivi

Would you mind sharing a part or model number on the sink? The one in our 311 is terrible. I feel like I’m constantly mopping water off the counter.

If you are asking me, I have no idea. Lowes only carries a handful of sinks in the store and I chose this one. To be honest, I don't even remember why I chose this one...I think it came down to looks.

**IBEW Sparky** · 10-06-2021, 06:35 PM

Originally Posted by PapiGG

We have an Imagine XLS 22RBE.

Has anyone changed out the bathroom sink and faucet in their late model Imagine? Maybe even the 22RBE?

I'm looking at a surface mount round or oval porcelain sink and a new faucet.

Curious what others have done.

Thanks!

We don't have an Imagine but in our 337RLS we quickly got tired of the two handled faucet... We upgraded to this one from Gander Mountain RV. Much easier to get your hands under it and it's easy to push the single lever off with an elbow which helps keep the faucet and counter dry.