User Tag List
Likes: 0
Results 1 to 10 of 11
Thread: 5th wheel pin box hits rails
-
09-22-2021, 06:01 PM #1
- Join Date
- Feb 2018
- Posts
- 168
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
5th wheel pin box hits rails
A question for you 5th wheelers: Does your pin box sit lower than your truck’s rails? Mine does, and its making a mess of my roltrax cover’s tracks. It hits them when turning about 45 degrees. If you have this issue, how do you keep this from happening?
Sent from my iPhone using Tapatalk2018 Solitude 384 GK-R
2017 GMC 3500 HD Denali
-
09-22-2021, 06:58 PM #2
- Join Date
- Feb 2019
- Location
- "Murvul", TN
- Posts
- 3,447
- Mentioned
- 138 Post(s)
- Tagged
- 0 Thread(s)
The bottom of the 5th wheel nose area should have at least 5-6" from it to the top of the bed rails. Make sure that the hitch (if adjustable) is set at it's highest position and also make sure the pin box is bolted in the lowest position.
2016 F350 CrewCab Dually
2018 Momentum 394M...Heavily Modded!
2023 Suzuki GSX-S1000 GT+
Excessive Payload is a Wonderful Thing
"If it ain't fast....It ain't Fun"
-
09-22-2021, 09:00 PM #3
Also, the tonneau tracks on MANY different brands and models of bed covers are simply are not compatible with pinboxes because of the interference. In fact, a good majority of the rolling/retractable covers have this issue in turns.
Rob & Nikki + Cloverfield
2020 Grand Design Solitude S-Class 3350RL
2015 RAM 3500 Longhorn Laramie Crew Cab, Long Bed, 4x4 Dually Cummins/AISIN
Mountains of Pennsylvania
-
09-23-2021, 02:39 PM #4
- Join Date
- Sep 2018
- Location
- Full Timers
- Posts
- 590
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
A question for you 5th wheelers: Does your pin box sit lower than your truck’s rails? Mine does, and its making a mess of my roltrax cover’s tracks. It hits them when turning about 45 degrees. If you have this issue, how do you keep this from happening?
Hopefully someone else can chime in with a better suggestion for you.2021 Solitude 310GK: Linen/DP windows/gen prep/slide toppers/king bed/EOH disc brakes/Cooper-H tires
2019 F-350: Lariat/CC/LB/Diesel/DRW/4x4/Bakflip MX4/B&W 20K/AirLift 5000
Other stuff: TST 507 TPMS/2x BB batteries/Victron BMV-712/Champion 3500 dual fuel gen/Garmin 780 GPS/22" Blackstone
-
09-23-2021, 06:22 PM #5
- Join Date
- Aug 2020
- Location
- Nicholson, Ga.
- Posts
- 129
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
At the risk of being overly critical, if you are allowing your self to maneuver into at 45 degree angle (enough to post this) perhaps you should consider a Turning Point Hitch. A Turning Point Hitch will move the pivot point back 23” and the pin box would stay in place and eliminate potential contact with your cover rails.
An angle of 45 degrees virtually eliminates seamless maneuvering and the stress on the suspension and tires are only measured by what fails first.
A direct answer to your question is to look for some type of hitch/pin box that pivots under the fifthwheel mounted at the trailer.2017 F-250 6.7 2019 273 MK
Retired Tanker Yanker
My your pleasures be many and your troubles be few!
-
09-24-2021, 01:51 PM #6
- Join Date
- Feb 2018
- Posts
- 168
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
2018 Solitude 384 GK-R
2017 GMC 3500 HD Denali
-
09-24-2021, 01:54 PM #7
- Join Date
- Feb 2018
- Posts
- 168
- Mentioned
- 5 Post(s)
- Tagged
- 0 Thread(s)
-
09-24-2021, 02:40 PM #8
- Join Date
- Jun 2019
- Posts
- 1,644
- Mentioned
- 18 Post(s)
- Tagged
- 0 Thread(s)
On my '13 F150 SB SCREW with Reese 16K 5th wheel hitch, purchased a GD Reflection 150 fifth wheel with the Lippert Turning Point pin box. I also have a roll back Pace Edwards JackRabbit cover on my SCREW. No problems with clearance of trailer over bed rails or pin box clearance.
Tips used for setup (istalled all myself except pin box): Set hitch head on highest level on support legs - clears bed rails by 5-6 inches, never touches. Roll back was setup using Pace Edwards install instructions. Roll back doesn't interfere with hitch operation when open, and, clears hitch head when opened or closed to hide contents in bed when trailer not connected.
One thing about Lippert Turning Point pin box you might consider........ for whatever reason, dealers in and around my area (including my selling dealer??) do not offer or even know that the Turning Point box requires annuall lubrication to the spindle and bearings (as stated in the supplied manufactuers manual)???? So....... if you decide to go that route, be prepared to maintenance the spindle and nut yourself. You'd think that mainetence revenue alone would solve THAT dilema...... NOT?
BTW, JFYI, the Reese Sidewinder pin box (similiar to the Turning Point in how it works), does appear to HAVE dealers who know the required maintenance and will offer to do so. Go figure????? Might consider that route just for the convenience of not having to do it yourself.
-
09-25-2021, 02:00 PM #9
- Join Date
- Sep 2013
- Location
- PA
- Posts
- 4,510
- Mentioned
- 240 Post(s)
- Tagged
- 0 Thread(s)
A couple inches on the bed sides equates to unrealistic turning radius in the overall scheme of things.
I ran into that issue when looking at rolling bed covers. I now use a folding one that has no framing that stays in place, it all flips forward and I can tow with it in the forward position.Steve- Inventory Manager at Tom Schaeffer's RV, Shoemakersville, PA www.tomschaeffers.com
[email protected]
2011 RAM 3500 SRW Outdoorsman Edition 4X4, 6.7 Cummins--TWEAKED!
2021 Reflection 310RLS
-
10-03-2021, 10:56 AM #10
- Join Date
- Dec 2016
- Location
- Somewhere, USA
- Posts
- 2,616
- Blog Entries
- 3
- Mentioned
- 30 Post(s)
- Tagged
- 0 Thread(s)
I have the Gator Trax, very similar to Roll Trax. On mine the hitch never touches the side of the truck. What I found was that when backing into un-even sites the roll of the trailer would cause the under side of the 5th wheel overhang to rub the top of the rails, and subsequently, the Gator Trax rails. Add my skirt rail to the mix. I have caught the skirt rail on the Gator Trax rail and tore the crap out things. It also crushes the molding around the under side of the 5th wheel overhang.
It only happens once in a while when I am trying to get into an un-even site. So I just roll with it, fix the damage when it occurs.
I think if your hitch pin box is hitting the side of you truck you may have an improper installation.Dallas
2017 Momentum 376TH, 2019 Ford F450, Dual Rear Wheel, 4x4, diesel.
2015 Harley-Davidson Street, XG750
Victron 100 amp Autotransformer...
Today, 12:14 AM in Electrical System and Wiring