User Tag List
Results 31 to 40 of 57
Thread: MorRyde System
-
10-05-2021, 03:12 PM #31
- Join Date
- Feb 2017
- Location
- Gilbert, SC
- Posts
- 20
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Terry,
We have a 2017 Reflection 303 RLS. I put the MorRyde 4000 system on out Reflection and it does make a difference in how the trailer rides. Good system.
Festus
2017 Reflection 303
2020 RAM diesel
-
10-05-2021, 03:33 PM #32
- Join Date
- Aug 2021
- Location
- Ohio
- Posts
- 34
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Thank you I plan on installed them soon.
Terry
2022 Imagine
2021 Chevy Silverado
-
10-05-2021, 04:00 PM #33
- Join Date
- Oct 2020
- Posts
- 135
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Not a GD, but on my last TT I had to replace an axle as a bearing failed and destroyed a spindle. On a concrete floor I jacked the TT up with a 6 ton floor jack on the I beams. Just high enough to get the wheels of the ground on hanging suspension. I placed the jack just forward of the axles for lifting and then placed 6 ton axle stands under the I beam frame rails. I placed them equidistant from the hitch to the front axle and rear bumper to the rear axle. With 4 axle stands, two on each side, in place and all four wheels off the ground I pushed shoved and pulled on the TT until I was comfortable it would not fall off. I then removed the front wheels and the axle, and repeated the process in reverse with the new axle assembly. Letting the TT down was basically a reversal of the lifting.
I will say that being under that TT was a weird experience when the axle was off and I was lying on my back, reminding myself that I had done all I could to ensure my safety and ensure that 7700 lb of TT was not going to land on my chest.I left the Forum due to dictatorial administration
-
10-05-2021, 07:12 PM #34
- Join Date
- Jun 2020
- Posts
- 43
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Out of curiosity, what does an upgrade like this cost? I tow mine longer distances so might be worthwhile.
2021 Grand Design Imagine 2600RB
-
10-06-2021, 06:21 AM #35
- Join Date
- Aug 2021
- Location
- Ohio
- Posts
- 34
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Thanks for telling me your experience. I have not installed MORryde yet. I will not be doing it myself, but I do plan of getting done yet this fall. I plan on going to Alaska next summer (I hope). Can you tell me anything about your trip?
Terry
2022 Imagine
2021 Chevy Silverado
-
10-08-2021, 12:45 PM #36
- Join Date
- Mar 2020
- Location
- North Georgia
- Posts
- 568
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
I purchased the Morryde 3000 and shackles with wet bolt kit from Amazon for a total of 250.45 including tax.
I checked with local RV and trailer shops for installation. the low was 1,600 and high was 2,500. Like Tim Lovell
said above get that sucker suspended safely. I am using 4 6 ton Jack stands, two 6 ton floor jacks, Lots of solid concrete blocks and
2 by 10 wood blocks to build my Jack stand piers.
The work will be done on a concrete pad.
Bob A.Last edited by attaboy; 10-08-2021 at 12:48 PM.
Bob & Alice
2020 Ram 3500 Limited Megacab SRW Aisin
2020 Grand Design Imagine 2450RL
ProPride 3P 1400 lb. bars WDH
Micro Air easy start, Goodyear Endurance Load rated "E" Tires
Titan 50 gallon diesel replacement tank
Previous: 2019 Ram 1500 Limited
-
10-10-2021, 07:49 AM #37
- Join Date
- Jun 2020
- Posts
- 43
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Thanks for the info. I don’t have a place at my house I could do it myself, but maybe next summer if I tow it to my parents. My entire driveway is sloped and I have an HOA so it couldn’t sit there very long either. It might make sense for me to just have a place do it.
2021 Grand Design Imagine 2600RB
-
10-21-2021, 05:56 PM #38
- Join Date
- Oct 2021
- Location
- Ridgefield, Washington
- Posts
- 15
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Just checked Amazon at its $410.37 for the Morryde 3000/HD shackle kit and the crossmember support.
Sent from my iPhone using Tapatalk
-
02-21-2022, 09:17 AM #39
- Join Date
- Jan 2020
- Location
- Southern California
- Posts
- 58
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I also had the CRE3000's, wet bolts and x-factor crossmembers installed on our 2500RL. Although, we could not get the X-Factor on front hangers as the one of the grey water tank lines ran just inside the hanger. I will try to install their drop X-Factor member, I may still have to modify the grey tank piping down there to get enough. Did you have any clearance issues with the grey water lines?
2020 Imagine 2500RL
ProPride P3
2021 F250 6.7L PSD
-
02-21-2022, 09:31 AM #40
- Join Date
- Oct 2020
- Location
- Atlanta, GA
- Posts
- 186
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I installed X-factor cross members on my 2400BH. Thread below...
https://www.mygrandrv.com/forum/show...mber-on-2400BH
Note that the drop cross members require horizontal clearance to the gray water line. IIRC, it's 4 inches.
Sent from my Pixel 3a using TapatalkJames and Dawn
2019 F150 SCREW 3.5EB 6.5' - Haloview MC7109; Cooper AT3 LTX; Sumo Springs; ProPride WDH
2021 Imagine 2400BH - GY Endurance 225/75-15; MORryde CRE3000, HD shackles and wet bolts, X-factor crossmembers
TCL TV turns on by itself after...
Today, 08:03 PM in Electronics