User Tag List
Results 1 to 10 of 56
-
09-27-2021, 01:55 PM #1
- Join Date
- Aug 2021
- Location
- OlymOlympia, WA
- Posts
- 22
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
GFCI plug has no power coming to it in Solitude st345GK
Hi folks, been searching the forum for this type of issue, but nothing too close came up. We are living in our Solitude while building a new house. Unit is only 6 months or so old.
The GFCI outlet popped and would not reset. I assume it had just died. Bought a new one and when I pulled the factory one out to check for power, so I could determine correct circuit breaker, I discovered that it had no 110 voltage coming into it. Have tried resetting any of the circuit breakers that could be the source for this outlet. No change. All non-GFCI outlets work fine. Some of the threads talked about a GFCI sub panel, and my breaker box has a 20 a sub panel circuit breaker, which I reset w/o fixing the issues--but no sign of another breaker box.
Short term we can use extension cords...Any ideas or help would be appreciated!
Thanks Chuck
-
09-27-2021, 03:51 PM #2
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,956
- Mentioned
- 42 Post(s)
- Tagged
- 0 Thread(s)
Look at other GFCI outlets. Bathroom, basement and others in the kitchen area.
John & Kathy
2014 F250 Lariat FX4 6.2L SBCC
2014 Reflection 303RLS
SW Indiana
-
09-27-2021, 04:20 PM #3
- Join Date
- Aug 2021
- Location
- OlymOlympia, WA
- Posts
- 22
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Thanks but think you misunderstood me. I pulled the outlet out and checked the 120 power coming into the back side of the GFCI--it was dead. The other outlets are marked GFCI but are not GFCI outlets--no buttons
-
09-27-2021, 04:42 PM #4
- Join Date
- Mar 2016
- Location
- Olympic Peninsula
- Posts
- 48
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
2006 Dodge 3500 DRW 4 x 4
Bilstein 5100 Series shocks / Air Lift Bags
B & W Turnoverball with Companion 20k
2016 Momentum 350M
2019 Honda 1000-5 Deluxe
-
09-27-2021, 05:34 PM #5
- Join Date
- Mar 2020
- Location
- ON & QC Canada
- Posts
- 4,767
- Mentioned
- 38 Post(s)
- Tagged
- 0 Thread(s)
The part that I don't get is the GFCI plug has no power going to it but all other plugs work fine.
Sent from my SM-P610 using TapatalkSteph & Lise
2019 F150 Lariat 2.7 EB
2020 Imagine XLS 22MLE
-
09-27-2021, 05:42 PM #6
- Join Date
- Aug 2021
- Location
- OlymOlympia, WA
- Posts
- 22
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
That is exactly my problem! I pulled the outlet out and checked voltage on both the input and the GFCI protected output wires behind it--no voltage. There must be a breaker somewhere else...
-
09-27-2021, 06:05 PM #7
- Join Date
- Mar 2021
- Posts
- 585
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
There may be a sub panel with a tripped breaker. There will never be a GFCI feeding another GFCI. There is no need to as a GFCI outlet will feed an unlimited string of outlets.
2010 Jayco 26(SOLD)
2011 Keystone Outback 277RL(SOLD)
2021 Grand Design 268BH
2013 Ford F250 XLT, 6.2L Gas
-
09-27-2021, 06:42 PM #8
- Join Date
- Aug 2021
- Location
- OlymOlympia, WA
- Posts
- 22
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
any idea where the sub panel would be?
-
09-27-2021, 07:42 PM #9
- Join Date
- Mar 2017
- Location
- Pearland, TX
- Posts
- 1,709
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
One on a different rig was in behind passthru wall
https://www.mygrandrv.com/forum/show...l=1#post368300- Gene
Kim & Gene
2015 Reflection 317RST
2017 Ram 3500 CC LB 4x2 6.7 CTD AISIN 3.73 DRW Auto Level Rear Air, BD3, Prodigy P3, Aux Tank
-
09-27-2021, 08:29 PM #10
- Join Date
- Aug 2021
- Location
- OlymOlympia, WA
- Posts
- 22
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Thank you for your help so far…
Got response from an email pointing me to the inverter as possible issue. Found the inverter. There weren’t any circuit breakers but there was a GFCI outlet which was tripped. It would not reset, nor would it power up when I pressed the power button.
I tried turning off all circuit breakers and then main power. Waited a minute of two and reset all them. Still no luck fixing the GFCI outlets.
Is there some other switch for the inverter, or does this mean the inverter is bad?
Thanks Chuck
Bedroom Sconce Light
Today, 06:30 PM in Electrical System and Wiring