Single Pedestal table in 260RD

[NCBill]

Has anyone replaced the single pedestal table in the 260RD? Or have you come up with a way to keep it from tilting when you press on one side or the other? I have found that moving it down a little so the tubes are farther into the tubes helps, but does not eliminate the wobble.

Since we do not have anyone traveling with us, I am considering replacing it with a nice stable wooden table, but keeping the top just in case. Any thoughts?

[1carguy]

Most single pedestal tables will wobble. The one in our Reflection didn't seem to tighten very well so we installed a longer bolt and removed some of the material at the clamp so that it gripped a little tighter, which helped. It still wobbles some but we can live with it. Like you said, a 4 legged table is the best solution in your case. Go for it.

[Dana H]

We converted from the folding table stand to the pedestal type and prefer it mainly because it is more comfortable to sit at. Yes it wobbles at times but there is a tension nut that can be adjusted o help manage the wobbles. Unlatch the height and tighten and relatch works for. Us. We used the same table.

If you are interested in the folding legs (OEM) contact me thru a private message and maybe we can work out deal.

[huntr70]

Our single pedestal extending table doesn't wobble in our 310RLS. Have you tightened the clamps at the releases? There are knurled knobs you can turn to tighten the clamps.

Are any screws loose on the actual mounts?

[NCBill]

Thanks for the reply. That is exactly what we did and it did help some. I will wait for awhile to see if we get used to the wobble.

[NCBill]

Thanks for the insight Dana. We will live with it for awhile to decide what to do.

[Ama Llama]

Our table top is very unsteady but the pedestal doesn’t move. Only the table top does. Any hints on how to fix?

[WhittleBurner]

Our table top is very unsteady but the pedestal doesn’t move. Only the table top does. Any hints on how to fix?

How and welcome, what trailer do you have? Is the pedastal on a tube or nailed in the floor?

[260rdinmaine]

How do I remove the....single pedestal telescoping table support on my 260rd. Seems to be stuck. Thanks

[kb0zke]

Look for a screw in each foot. There may or may not be a cap on the hole.