User Tag List
Thanks: 0
Likes: 0
Results 1 to 8 of 8
-
10-11-2021, 07:11 PM #1
- Join Date
- Jul 2021
- Posts
- 26
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Underbelly Discovery and Screw Replacement
Hey guys,
I was working on the new to us 2019 Reflection 337RLS
I was surprised to find that the underbelly cover had been previously opened. Not only opened but basically, cut in half. I contacted the previous owner and found that the warranty company had replaced a tank due to a leak. I completely understand that these things happen but I don't think the warranty company did their best work in putting everything back together.
What is the best tape to seal the underbelly with? Gorilla Tape? I'd also like to replace some of the screws. Some are missing and some are missing the rubber-backed washer. Does anyone know the part numbers for these? Maybe I can find them at ACE?
Thanks!2019 Reflection 337-RLS
2014 F350 SRW CC LB Lariat PS 6.7
-
10-11-2021, 07:16 PM #2
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,956
- Mentioned
- 42 Post(s)
- Tagged
- 0 Thread(s)
It looks like they may have used the appropriate underbelly repair tape, but their care in application leaves something to be desired.
You can span the cut with thin boards or a metal strip and screw it in place and add tape if you want.John & Kathy
2014 F250 Lariat FX4 6.2L SBCC
2014 Reflection 303RLS
SW Indiana
-
10-11-2021, 07:20 PM #3
- Join Date
- Jul 2021
- Posts
- 26
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
2019 Reflection 337-RLS
2014 F350 SRW CC LB Lariat PS 6.7
-
10-11-2021, 07:53 PM #4
- Join Date
- Jul 2017
- Location
- SW Indiana
- Posts
- 1,956
- Mentioned
- 42 Post(s)
- Tagged
- 0 Thread(s)
-
10-11-2021, 08:12 PM #5
- Join Date
- Jul 2021
- Posts
- 26
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
I'm thinking of trying something like this. Ideally I'd like to see this in metal.
https://www.tapplastics.com/product/...aAgtyEALw_wcB#2019 Reflection 337-RLS
2014 F350 SRW CC LB Lariat PS 6.7
-
10-11-2021, 09:01 PM #6
- Join Date
- Nov 2019
- Location
- S. E. PENNSYLVANIA
- Posts
- 919
- Mentioned
- 15 Post(s)
- Tagged
- 0 Thread(s)
Would something like this work? You can order it in different lengths.
https://www.dkhardware.com/h18a-ccp9...t-3646978.htmlBill & Colleen ~ Schwenksville, Pa
2019 Reflection 337RLS
2006 GMC Sierra 3500 8.1L V-8
Firestone Ride-Rite Air Bags
Front Stabilizer Bar
Rear Anti Sway Bar
-
10-11-2021, 09:26 PM #7
- Join Date
- Jul 2021
- Posts
- 26
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
05-16-2022, 04:51 PM #8
- Join Date
- May 2018
- Posts
- 41
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY