User Tag List
Thanks: 0
Results 1 to 9 of 9
Thread: Wobbly dining table
-
10-12-2021, 08:41 PM #1
- Join Date
- Sep 2020
- Posts
- 49
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Wobbly dining table
My 22MLE's dining table has a slight wobble, it's not so bad that things roll off it's just very annoying. It is the pedestal type that has clam shell type clamps to hold it in place, which is where the wobble occurs. I have tightened the clamps to the point the rubber is meeting stopping it from further tightening although the screws could be tightened further.
So my question is has anyone tried to trim the rubber to allow the clamps to tighten further or could this make matters worst?MrBaker
2021 Imagine XLS 22MLE
2011 Ford F250 Lariat 6.2 L
-
10-13-2021, 01:44 PM #2
- Join Date
- Dec 2020
- Location
- Alpharetta, GA
- Posts
- 123
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
I also have a 22MLE and have the same issue/concern about the table. Hopefully someone here in this forum can provide some words of wisdom. That said, i do have an appointment after the Savanah rally at Skidaway state park for my 1st yearly "tune-up" which I have already indicated to service to please look into this.
Hope to see any and all at the rally !Mitch and Alisa Frank
2020 Imagine XLS 22 MLE
2020 RAM 2500 Diesel
-
10-13-2021, 03:15 PM #3
- Join Date
- Mar 2020
- Location
- ON & QC Canada
- Posts
- 4,768
- Mentioned
- 38 Post(s)
- Tagged
- 0 Thread(s)
Ours was the same way to the point that I was going to install an angle iron on the wall so that the table would sit on. I then tightened the 2 bracket on the post first and that did the trick. Tighten them nice and tight and it should do the trick.
Sent from my SM-P610 using TapatalkSteph & Lise
2019 F150 Lariat 2.7 EB
2020 Imagine XLS 22MLE
-
03-19-2022, 10:01 PM #4
- Join Date
- Sep 2020
- Posts
- 49
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-21-2022, 07:14 AM #5
- Join Date
- Dec 2020
- Location
- Alpharetta, GA
- Posts
- 123
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Mitch and Alisa Frank
2020 Imagine XLS 22 MLE
2020 RAM 2500 Diesel
-
03-21-2022, 05:44 PM #6
- Join Date
- Mar 2020
- Location
- ON & QC Canada
- Posts
- 4,768
- Mentioned
- 38 Post(s)
- Tagged
- 0 Thread(s)
Steph & Lise
2019 F150 Lariat 2.7 EB
2020 Imagine XLS 22MLE
-
03-22-2022, 07:58 AM #7
- Join Date
- Jul 2020
- Location
- Tallahassee Fla
- Posts
- 252
- Mentioned
- 7 Post(s)
- Tagged
- 0 Thread(s)
We experienced this problem also. I didn't cut any rubber but did the "reverse order" tightening (as stated by Steph) and it has worked very well. Just an aside, there's really nothing in our trailer that doesn't wobble/shift/slide/chafe/sag/rattle/flicker or at times makes an irritating sound or smell, more or less.
Just sayin'.Robert and Chris
2021 Imagine XLS 22MLE
2024 2500HD Silverado 6.6L gas
Blue Ox Sway Pro
-
03-22-2022, 07:17 PM #8
- Join Date
- Sep 2020
- Posts
- 49
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Wobbly table
MrBaker
2021 Imagine XLS 22MLE
2011 Ford F250 Lariat 6.2 L
-
03-23-2022, 06:53 AM #9
- Join Date
- Dec 2020
- Location
- Alpharetta, GA
- Posts
- 123
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
Freezer Opens on Travel Day?
Today, 03:46 PM in Appliances