While setting up in our current location on a concrete pad, I unhooked from the truck and pushed the auto level. After a bit I noticed the system said it was level and my wife while standing on the curb side of the camper asked why that side had raised the tires off the ground. 1st time that has happened. I use wooden blocks under each jack. You could tell by looking that the camper (369RL) was not level. I started all over. Hooked up truck, unhooked, hit auto level and same result. I tried zero reset on system but could not get it to reset anything. Called Lippert to get an idea. He said try zero reset. Nothing again. We manually leveled as best we could. Any ideas on what is happening? Is control panel bad?