User Tag List
Thanks: 0
Results 1 to 10 of 25
Thread: Nautilus panel fresh water leak
-
11-09-2021, 10:25 PM #1
- Join Date
- Sep 2020
- Posts
- 126
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
-
11-09-2021, 10:28 PM #2
- Join Date
- Mar 2020
- Location
- Whatever state the landing gear sits upon (Texas c
- Posts
- 763
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
-
11-09-2021, 10:45 PM #3
- Join Date
- Sep 2020
- Posts
- 126
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
-
11-09-2021, 10:49 PM #4
- Join Date
- Mar 2020
- Location
- Whatever state the landing gear sits upon (Texas c
- Posts
- 763
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
The fitting could be loose. It's a pain to do but check the connection between the connection in back of panel and the fitting in front. If the fitting itself is cracked or damaged, it's all plastic so no other choice but to replace it. Mine has come loose, and is getting loose again, so I'll eventually replace with a metal fitting .
Full Timing Family
2021 Momentum 395MS-R
2021 Ford F450 King Ranch
-
11-09-2021, 10:59 PM #5
-
11-09-2021, 11:00 PM #6
- Join Date
- Sep 2020
- Posts
- 126
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
-
11-09-2021, 11:07 PM #7
- Join Date
- Mar 2020
- Location
- Whatever state the landing gear sits upon (Texas c
- Posts
- 763
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
-
11-09-2021, 11:08 PM #8
- Join Date
- Mar 2020
- Location
- Whatever state the landing gear sits upon (Texas c
- Posts
- 763
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
-
11-10-2021, 04:48 AM #9
- Join Date
- Mar 2020
- Location
- ON & QC Canada
- Posts
- 4,768
- Mentioned
- 38 Post(s)
- Tagged
- 0 Thread(s)
I wash also going to say check the rubber washer first. It might be as simple as that. Try using a different washer to see. Maybe add a second one.
Sent from my SM-P610 using TapatalkSteph & Lise
2019 F150 Lariat 2.7 EB
2020 Imagine XLS 22MLE
-
11-10-2021, 05:36 AM #10
- Join Date
- Sep 2020
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 1,919
- Mentioned
- 20 Post(s)
- Tagged
- 0 Thread(s)
Mine will leak with some hoses and not others. Stamped threaded ends are problematic. Ones that appear more 'machined' work best for me. And I don't let the weight of the hose 'hang' on the connector.
Personally, I think it is a crappy connector and will likely change it for a better piece at some point.2018 Dodge 3500 6.7 Cummins SRW w/Aisin
2021 Reflection 303RLS
New to RV'ing since 1997
Outside Trim Torx screw size
Today, 07:39 PM in General Discussion