Nautilus panel fresh water leak

[maxdixdragon]

After looking at those plastic hook ups I decided to install quick connects to help prevent wear on those. Seems to have worked for a few years so far.

[mostad]

Hi everyone,

When hooking up my fresh water hose to the Nautilus system, there's a leak and a lot of water ends up on the ground. Has anyone faced this issue? If so, what can I do to fix it?

Attachment 37625

I have had the same issues, maybe not that bad. I ended up putting 2 rubber hose washer in the fitting, it turns out my hose fitting was hitting the white part of the Nautilus so it wasn’t getting tight enough.

[dtokarczyk]

We put a brass 90 degree connector and then install our hose.

[st2rv]

I added a brass 45 degree fitting (Amazon) https://www.amazon.com/RecPro-Fittin...s%2C492&sr=8-8
RecPro may have the Nautilus part. https://www.recpro.com

[Michael C.]

I had the very same thing happen. So i teflon taped the dickens out of a brass elbow and screwed that into the plastic nautalus fitting and now i screw my fresh water hose into that. fixed tat problem for now anyway. I just leave the fitting attached all of the time