Do you carry a ladder?

[Mjlebsa]

Here is mine, coming out of the 5" vinyl fence post holder....


And, set up for use.......7'

I like the set up


Sent from my iPhone using Tapatalk

[Mjlebsa]

Here is mine, coming out of the 5" vinyl fence post holder....


And, set up for use.......7'

How did you attach the post?


Sent from my iPhone using Tapatalk

[Scott'n'Wendy]

@xrated
Got a link for that? Or a brand name or model name?

[Mjlebsa]

@xrated
Got a link for that? Or a brand name or model name?

I found it on Amazon.

GP Logistics SLDD7 7' Compact Folding Ladder , Red


Sent from my iPhone using Tapatalk

[jpcarro11]

I found it on Amazon.

GP Logistics SLDD7 7' Compact Folding Ladder , Red

I carry the same ladder in a conduit tube mounted alongside my sewer hose tubes.

[Mjlebsa]

I carry the same ladder in a conduit tube mounted alongside my sewer hose tubes.

Can you give me information on the conduit tube? Where you got it etc…?

Thanks


Sent from my iPhone using Tapatalk

[jpcarro11]

Can you give me information on the conduit tube? Where you got it etc…?

It's a 6" PVC schedule 40 pipe. Can be found at Home Depot or Lowes. There are kits that provide end caps and hanging brackets. Cut pipe to length, install end caps, and paint black. Drilled 3/8" holes in I-beam for the U-bolt brackets and hung the tube.

[IBEW Sparky]

Can you give me information on the conduit tube? Where you got it etc…?

Thanks


Sent from my iPhone using Tapatalk

For about half the price of the 6" pipe setup you can buy the parts for the 5" PVC fence post carrier.

https://www.lowes.com/pd/Freedom-Com...k-Post/4009495

Fence Post Cap https://www.amazon.com/dp/B078JQMLQT...ing=UTF8&psc=1

I attached 1 end cap with small stainless screws and the other with a small hinge... then added a small lock just like the ones on the cargo doors.
Then you can fab a bracket out of aluminum angle, unistrut, or whatever you have on hand.

[xrated]

How did you attach the post?


Sent from my iPhone using Tapatalk

I bought some 1 1/2" x 1 1/2" aluminum angle and used 1/2"-13 hex head bolts. There are already holes in the hydraulic landing gear supports, so you don't have to drill any new holes in the trailer......just holes in the aluminum angle. I bolted mine low enough that the 5" vinyl fence post sits on top of the angle, then just used some pipe strapping to hold the fence post down to the angle with some 1/4"-20 screws.

[Mjlebsa]

I bought some 1 1/2" x 1 1/2" aluminum angle and used 1/2"-13 hex head bolts. There are already holes in the hydraulic landing gear supports, so you don't have to drill any new holes in the trailer......just holes in the aluminum angle. I bolted mine low enough that the 5" vinyl fence post sits on top of the angle, then just used some pipe strapping to hold the fence post down to the angle with some 1/4"-20 screws.

Thanks


Sent from my iPhone using Tapatalk