User Tag List
Thanks: 0
Results 1 to 4 of 4
-
12-25-2021, 03:35 AM #1
- Join Date
- Dec 2021
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Best place to put 6 Li batteries & MultiPlus2 Inverter box? (Not in pass-thru Plz)
Is there space where the existing Converter box is currently (GD Imagine 2670MK) ?? Want to minimize Wire length, etc) Thanks for any TIPS ;-)
-
12-25-2021, 02:02 PM #2
- Join Date
- Dec 2020
- Location
- Central Wisconsin
- Posts
- 8
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I put 4 under the bed in my imagine 2800BH. The inverter is in the pass through, though, just on the other side of the wall. I wanted to maintain storage in the pass through and felt this was an okay compromise.
Edit: Fighting to get the third picture to send...
Attachment 38258Last edited by jdmeer; 12-25-2021 at 05:49 PM.
-
12-25-2021, 04:33 PM #3
- Join Date
- Aug 2019
- Posts
- 4
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Possible battery location.
I have a 2970RL. Here is what I found to be my best option with similar equipment. It is under the bed though. Inside are 6 BB batteries, a GoPower 3000W inverter, two 40 amp charge controllers, 20 amp DC to DC charge controller, fuses, wire and breakers alongside the interior wall at the foot of the bed. I also cut out openings in the sides of the storage area, added vents, cooling fans and several thermal switches to activate the fans when the GoPower is running under load >110 degrees (typical when powering an AC unit). Hope this helps.
-
12-26-2021, 03:12 PM #4
- Join Date
- Dec 2021
- Posts
- 2
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
impressive use of space under the bed!!! ;-)
Trying to get trailer camera wire...
Today, 10:01 PM in Electronics