User Tag List
Thanks: 0
Likes: 0
Results 1 to 3 of 3
-
01-03-2022, 08:21 PM #1
- Join Date
- Jan 2022
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Grand Design 2021 Imagine 2500 RL
Bathroom sink cold water line leaking at the connector. Recommend repair proceedure.
-
01-03-2022, 09:39 PM #2
Welcome to the forum.
Depends where the leak is.
Is it on the backside of the female fitting between the fitting and tubing? This would require a new fitting and clamp ring.
Is it between the male and female fitting? Could require some tightening or the rubber insert might need replacement. In some cases, the female fitting requires replacement.
Sent from my SM-G950U using Tapatalk2023 Momentum 398M-R
2023 Ford F-450
SOLD - 2021 Reflection 311BHS
SOLD - 2017 Momentum 399TH
-
01-06-2022, 08:21 PM #3
- Join Date
- Dec 2016
- Location
- New Jersey
- Posts
- 258
- Mentioned
- 6 Post(s)
- Tagged
- 0 Thread(s)
Check if you can flex the "line" going to sink cold. If its kinda spongy then it can be frustrating getting new crimps on that. Seems the diameter is a hair larger than a typical crimp ring. I had a failure right at the crimp. I ended up replacing the blue spongy hose with regular pex from Big Box store and crimped that on.
2022 GD 2970RL (soon to be "released")
2019 F350 Platinum, Shorter bed, Diesel, SRW, 3.55 rear, 55gal tank!
2016 F150 Platinum (traded in for F350 fall 2019)
2016 GD 2600rb (Sold)
Re-pack bearings necessary?
Today, 09:25 AM in Axles, Brakes, and Suspension