User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
-
01-09-2022, 03:29 PM #1
- Join Date
- Oct 2018
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Bushings, Cre 3000, and X factor on 150 series
Has anybody replaced the dexter ez flex on their 150 series suspension with a MorRyde cre 3000 and also added the MorRyde x factor brace system. Also, I have about 22,000 towing miles on my 230RL and am wondering if the bushings are going to be worn even though the wet bolts have had regular greasings.
Last edited by ruditudes; 01-10-2022 at 03:09 PM.
-
01-21-2022, 01:23 PM #2
- Join Date
- May 2018
- Location
- North Carolina
- Posts
- 15
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I installed the CRE-3000 and the X-Factor braces at all three locations. I mainly did this because I had exchanged the axles to 5200# axles to allow me to install disc brakes and had raised the height using blocks of my 230RL by two inches to make it ride level. I also installed the MorRyde heavy duty shackle and bushing systems. The result was a much smoother ride for the RV. I would suspect that your bushings are worn after 22000 miles.
2018 Reflection 230RL
2017 Ford F250 6.7L Lariat
-
01-25-2022, 06:22 AM #3
- Join Date
- Sep 2020
- Location
- Thunder Bay, Ontario, Canada
- Posts
- 1,935
- Mentioned
- 21 Post(s)
- Tagged
- 0 Thread(s)
I've had both cre3000 and EZ flex. I don't think you will notice a difference. Exchanging one for the other is kind of a lateral move. Not an upgrade of any significance.
My personal opinion is the EZ-Flex is better.2018 Dodge 3500 6.7 Cummins SRW w/Aisin
2021 Reflection 303RLS
New to RV'ing since 1997
-
01-31-2022, 09:53 PM #4
TCL TV turns on by itself after...
Today, 08:03 PM in Electronics