User Tag List
Thanks: 0
Results 11 to 16 of 16
-
02-20-2022, 11:07 AM #11
-
10-12-2022, 06:51 PM #12
- Join Date
- Oct 2022
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
I had the same problem and after some research, I decided to press and hold the Fan and Down button at the same time for three seconds and the digital t-stat brought back up the Heater option. After I saw that holding down the UP and DOWN temp buttons toggles the Fahrenheit and Celsius, I thought I would try holding down different combinations. I dare not to repeat the process but I believe my correction was the fan and down button.
-
10-23-2022, 06:25 AM #13
- Join Date
- Apr 2021
- Location
- Omaha
- Posts
- 45
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
I do not like the Furrion Thermostat in our 2021 Imagine. Would much rather prefer to have a basic one like like I had in my '97 Prowler.
John2021 Imagine 2600RB
-
10-25-2022, 07:36 AM #14
- Join Date
- Dec 2019
- Posts
- 170
- Mentioned
- 3 Post(s)
- Tagged
- 0 Thread(s)
If you have NO error codes on the thermostat and HEAT option is not displayed the the issue is most likely the connection to the A/C control gateway .. The furnace is turned on via signal sent to the main Zone A/C unit ... if the gateway cant see there is a furnace installed then it wont display that... and of course no heat.. Check connections
-
02-03-2023, 04:04 PM #15
- Join Date
- Feb 2023
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
02-03-2023, 04:08 PM #16
Momentum/Solitude TSB 24-001 for...
Today, 06:32 AM in General Discussion