User Tag List
Thanks: 0
Results 1 to 10 of 10
-
03-09-2022, 03:36 PM #1
- Join Date
- Mar 2022
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Split in side door of brand new 2022 Momentum 21G
Has anyone else experienced this? 1 night spent in the trailer so far, stored in my yard. Definitely no impacts etc. Weather was very cold recently but going out to the trailer prepping for an upcoming trip and I noticed there's a split in the door. I've left messages for the dealer we bought the trailer from but no word back yet. It's 4 months old. The split is about 2" long, the corner is still stable although it doesn't look good. Hoping to get the door replaced under warranty ASAP and just wondering if this is common.
Last edited by NickInColorado; 03-09-2022 at 03:48 PM.
-
03-09-2022, 04:09 PM #2
- Join Date
- Sep 2020
- Location
- Springdale, Ar
- Posts
- 632
- Mentioned
- 13 Post(s)
- Tagged
- 0 Thread(s)
I run a Facebook group for the 29G/331G toyhaulers and frequent the other Momentum toyhauler groups. Never saw that before.
Last edited by TerryH; 03-09-2022 at 04:46 PM.
2021 Momentum 31G
2021 20' Haulmark Edge race trailer
'17 Ram CCLB 3500 dually 6.7 turbo
'96 Chevy C3500 CC dually 454
2019 Honda Talon X
1985 Honda FL350R Odyssey
-
03-09-2022, 04:42 PM #3
- Join Date
- Mar 2022
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
03-09-2022, 05:08 PM #4
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,817
- Mentioned
- 61 Post(s)
- Tagged
- 0 Thread(s)
Looks like the screw started it, and the cold has made it fracture further. Looks like a one-off event.
Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
-
03-10-2022, 08:19 AM #5
- Join Date
- Oct 2014
- Posts
- 1,795
- Mentioned
- 9 Post(s)
- Tagged
- 0 Thread(s)
Looks like they didn't predrill and the screw cracked the fiberglass. Full replacement for sure.
-
03-10-2022, 09:41 AM #6
-
03-10-2022, 09:47 AM #7
- Join Date
- Mar 2022
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
That is water, pictures were taken in the rain. No impacts, definitely new. I have pictures where it wasn't there. The above poster is right. They did not pre-drill the hole where the plate is attached for the magnet. The dealer submitted the warranty claim this morning. Hopefully it doesn't take forever for a new door.
-
03-10-2022, 11:16 AM #8
- Join Date
- Apr 2019
- Location
- In the Blue Ridge Mtns of VA
- Posts
- 605
- Mentioned
- 16 Post(s)
- Tagged
- 0 Thread(s)
Hope your replacement door is in stock or can be quick-shipped from Lippert. We had our entry door replaced under warranty because original was installed at a slight angle in the opening and wouldn't latch (or unlatch - but that's another story). Couldn't adjust it enough, so entire thing (door, screen door & frame) replaced. Claim was made in July of last year and took about 5 months for GD to get a new door from Lippert. GD had plenty of doors on hand, but all were committed to units on the assembly line. Of course, dealer forgot to order the decals at the same time as the door, so that just got done last week. Fortunately, we were still able to use the camper while we waited on the new door although in order to get the door to close (or more importantly, open, if we were inside), I had to remove the strike plate, leave it off, and cut out a bigger opening for the latch and deadbolt. Had an RV Lock, but even with the strike plate removed, could not get it installed in the old door so it would open and close. That was weird.
2022 Solitude 378MBS-R
2021 Ford F450 CC Lariat Ultimate FX4
1966 Shasta Astroflyte (1 year restoration project that is going on year 6)
-
03-10-2022, 12:29 PM #9
-
03-10-2022, 02:38 PM #10
- Join Date
- Mar 2022
- Posts
- 10
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
RV Lock vs Lippert Entry Lock?
Today, 08:22 PM in General Tech Topics