User Tag List
Thanks: 0
Results 1 to 10 of 12
Thread: Auto Level Doesn't Work
-
03-14-2022, 10:50 AM #1
- Join Date
- Mar 2017
- Location
- Monroe, NC
- Posts
- 566
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Auto Level Doesn't Work
My Auto Level doesn't work I get an error message. I can manually level no problem. The last time I used it everything was fine.
After hooking to the truck, I always hit retract all, when I did that the left landing gear only went part way up. After hitting retract all a few tines the left leg went all the way up.
When I got to my destination the landing gear worked OK, when I hit auto level I get an error. I was able to manual level with no problem.
I have a Solitude 310 GK any suggestions?
Mal & Helen
With Mitzi our Yorkie
2021 Solitude 310GK-R
2020 Reflection 303RLS Sold
2020 Ford F250 Lariat Super Duty 4WD 6.7 Diesel Short Bed
B&W Companion Slider
Amateur Radio Call sign WA2TWA
-
03-14-2022, 11:27 AM #2
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,117
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
Did you try turning off the leveling system and then turn it back on again? This usually clears any error messages I get and the auto-leveling will work again. If not, you can find where the control module connects to the rest of the system and unplug it for a minute or two to clear any memory. It may have to be recalibrated after that. I have found Lippert tech support to be most helpful when I have called them in the past: 432-547-7378.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
03-14-2022, 11:48 AM #3
- Join Date
- Oct 2020
- Location
- Breckenridge, CO
- Posts
- 109
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
When I have experienced errors with my 4 point system I've had to "rehome" the jacks to clear the error and set things back to normal. Instructions are on Lippert's website. Easy fix.
2021 Reflection 31MB
2022 Cougar Half Ton 29RLI
2023 RAM Laramie 2500 Crew Cab CTD 4X4
Demco Slider Hitch, MorRyde Pin Box
-
03-14-2022, 11:50 AM #4
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,117
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
U.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
03-14-2022, 11:59 AM #5
- Join Date
- Oct 2020
- Location
- Breckenridge, CO
- Posts
- 109
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Misread his sig too quickly and saw the former 303 but not the "sold". Thanks Rob!
2021 Reflection 31MB
2022 Cougar Half Ton 29RLI
2023 RAM Laramie 2500 Crew Cab CTD 4X4
Demco Slider Hitch, MorRyde Pin Box
-
03-14-2022, 12:26 PM #6
- Join Date
- Apr 2017
- Location
- Fort Collins, Colorado
- Posts
- 1,305
- Mentioned
- 26 Post(s)
- Tagged
- 0 Thread(s)
What error message are you getting?
Just a few ideas;
Are you starting with the nose high (above level)? When unhooking, I check the angle readout on the display and make sure I am nose high before hitting auto-level.
Does the hydraulic pump just stop then you can restart it in a few seconds? I am wounding if your auto-reset breaker is tripping.
Is your battery fully charged and are you plugged into shore power when you try to level? I find the leveling system is very sensitive to low voltage and/or a weak battery.
Is your battery disconnect switch "connected" (so you can not remove the key)? They can get bumped and will effect the systems even if plugged into shore power.
ChrisLast edited by CoChris; 03-14-2022 at 12:33 PM.
Chris & Karen
Fort Collins, CO
2017 F-350 SRW 6.7 Lariat Value CC LB 4x4
2018 Solitude 310GK - Sold 7/2023
-
03-14-2022, 12:46 PM #7
-
03-14-2022, 01:44 PM #8
- Join Date
- Dec 2020
- Location
- Johnson City, TN
- Posts
- 391
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
The auto-leveling process begins by the dropping the nose BELOW level. If your rig cannot get below level a few degrees, for example if you use blocks or jack blocks (like the ones below), or you're on a nose-up sloped lot, it throws an error and stops.
The easiest answer is the simplest to fix: remove blocks and try again.
https://andersenhitches.com/products/trailer-jack-blockColin & Tracy
'21 Chevy Silverado 3500HD LTZ/Z71/SRW, Long bed, Anderson UH
'21 Solitude 310 GK-R
-
03-14-2022, 03:30 PM #9
- Join Date
- Jul 2014
- Location
- Wherever...
- Posts
- 9,117
- Mentioned
- 191 Post(s)
- Tagged
- 0 Thread(s)
Do you have one of those central control-everything panels (Lippert OneControl)? If not, the box on the basement door with the buttons is what needs to be unplugged. I suggest calling Lippert Customer Service and letting them step you through everything. They'll know exactly what you have when you describe it to them and can tell you just what to do to trouble-shoot things.
RobU.S. Army Retired
2012 F350 DRW CC LB Lariat PS 6.7
2020 Solitude 310GK-R, MORryde IS, disc brakes,
Sailun LRG tires, solar, DP windows, W/D
(Previously in a Reflection 337RLS)
Full time since 08/2015
-
03-14-2022, 06:44 PM #10
Victron 100 amp Autotransformer...
Today, 12:14 AM in Electrical System and Wiring