One circuit no power

[dually mike]

First trip this year. Everything working, then middle of the night fridge starts beeping. Will not run on electric, only propane. Then this am I find outlet under microwave cabinet is dead. Only 1 GFCI I can find is in bathroom, n it’s not tripped. No circuit breakers tripped. Any ideas what else to look for?

[trailrydr]

Bummer. Maybe check connections for pinched or damaged wires under slide?

There is a GD recall on wiring for adsorption fridges for certain models based on VIN. If you have one, do a search on this site for it.

Also, pls list the year and model of your RV, and type of fridge (if not OEM), when looking for help. Lots of knowledgeable folks here on the site that might be able to shed some light on your issue.

[huntr70]

Depending on your model coach, you may have another GFCI in an outside outlet or pass through.

[dually mike]

OK, further investigating. It is the whole slide out outlet circuit that is dead. Fridge, outlet under microwave cabinet, and outlet that recliners plug into. Everything worked yesterday, fridge started beeping around 3:30 am. It's a 2018 Momentumnn 395 M.

[xrated]

OK, further investigating. It is the whole slide out outlet circuit that is dead. Fridge, outlet under microwave cabinet, and outlet that recliners plug into. Everything worked yesterday, fridge started beeping around 3:30 am. It's a 2018 Momentumnn 395 M.

Go outside and remove the lower fridge vent....the black one that is right at the back of the fridge. Once you remove the cover, stick you head inside a bit and look right....you should be able to see the 120VAC receptacle that the fridge is plugged into. See if it has a GFCI receptacle there.....I can't remember if it does or not. If it doesn't have a GFCI, look all the way to the left....on the wall of the fridge compartment down low. There is a 120V cable over there and maybe some WAGO type splicers.....check that area out.

[dually mike]

Update- So checked all of the breakers- have power coming out of them. Looking in outside fridge compartment, there are 2 feed wires coming up. Can't see any damage to either, and they go thru the frame rail into the underbelly. Guess I will have to follow these out after I get home. Just makes no sense that they all worked, then stopped in the middle of the night. Only GFI I can find is in the bathroom, and that's working.

[dually mike]

Oh, and one more thing, the radio doesn't work either. TV outlet is fine.

[JCR GD]

... There is a 120V cable over there and maybe some WAGO type splicers.....check that area out.

... Also check the splice thingy inside the frame rail above the belly cover. Could have come loose or fallen apart.

[JCR GD]

Oh, and one more thing, the radio doesn't work either. TV outlet is fine.

Radio should be 12v

[Second Chance]

Oh, and one more thing, the radio doesn't work either. TV outlet is fine.

The radio is 12VDC - the TV is 120VAC.

You can create a signature block with your RV and tow vehicle information (see mine below). That way you won't have to repeat that information whenever you post or ask a question - and others won't have to ask. You can create a signature by going to:

Forum Actions (on menu bar) -> Edit Profile -> Edit Signature (under My Settings on the left)

Rob