What did you do to your Grand Design today?

[Rsavino]

Now that’s the way to do it!!! Looks GREAT!!!

[TerryH]

Now that’s the way to do it!!! Looks GREAT!!!

Thank you!

[traveldawg]

Nice job. Looks great. Without a doubt it will work out fine.

[eodenc]

Moved the spare/outside tv from the house to under the bed getting ready for tailgating season.

[ArizonaTim]

Raised my landing jacks for more clearance.

[JimChow]

Installed a Valterra sewer hose holder. Don't know why I didn't do it sooner. Also repaired a water leak.

[BobinICT]

Replaced the lug nuts with solid nuts. Finally a 70 degree cloudy morning and set tire pressures, and, snugged up the valve cores on all four including the spare along with the TV tires. Replaced the main water filter I have installed.

[geotex1]

Cursed it for making me mod it...again! Will post some pictures when I have a chance to edit and upload, but finally finished a combination project that improves the clearance and function of the tank dump and makes my outdoor sink setup for my cooking station a truly quick connect affair.

[Redapple63]

Added 12v usb ports over the bed on each side for phones. Tapped into each light for power.

Bill

[traveldawg]

"Re-mounted" my water heater. The chip board platform GD uses had sagged letting the back of the tank go lower and it was pushing out the front bottom of the tank such that it pushed the trim strip around the tank out noticeably (like maybe 3/16").

I drained the tank, removed the trim and mounting screws, raised the bottom rear with some 1/2" plywood and re-secured the tank.