User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 5 of 5

Thread: HDMI access

  1. #1
    New Member
    Join Date
    Sep 2021
    Posts
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    HDMI access

    Hi all,
    I have a Solitude 346FLS., with a televator. I am unable to access the HDMI ports on the back/side of the Roku TV. The TV is mounted in the televator case, and there is less than an inch space all around the tv. I do not want to pull out the fireplace. I have a blue ray player and I-pads that I want to connect the tv. We don't always have Wi Fi where we are traveling and I'd like to hard wire my accessories. Does anyone have a fix for this? The surrounding wood case for the TV is screwed all the way around and there is no room to get a screw driver in there to lift off the top. Help.

  2. #2
    Site Sponsor
    Join Date
    Mar 2018
    Location
    Minnesota
    Posts
    110
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Not sure of the setup on your unit but on my 310, I used the hdmi that went to the radio and plugged that into a splitter. I then plugged the Blu-ray and radio into that using short hdmi cables. Still have a couple ports open for a Nintendo switch or anything else.

  3. #3
    New Member
    Join Date
    May 2021
    Location
    Wisconsin
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have this same issue Same RV Solitude 346FLS.
    There is not an HDMI on the Radio (Rockford Fosgate) I have a USB and BlueTooth, FM, AM, WB.

    I want to connect an AppleTV with my Starlink Internet. - Easy Enough to do.....if I could get to the back of the TV to Plug in an HDMI cord.

    Is there a Quick Release or Lift off FOr the TV from the Lift Mechanism?

  4. #4
    Site Team traveldawg's Avatar
    Join Date
    Aug 2017
    Location
    Florida Space Coast
    Posts
    3,853
    Blog Entries
    1
    Mentioned
    94 Post(s)
    Tagged
    0 Thread(s)
    I'm not sure swinging the fireplace out to access the TV when it is in the well would help. On my rig the access area behind the fireplace would not let me get to the rear of the TV.

    I think what you might do is lower the TV a bit, fold the wood 'flap' back and away from the televator mechanism, and reach down from above to get to the HDMI ports.
    Larry KE4DMG
    2022 F-350 KRU SRW LB - Airlift 5000+, ForScan, 37 RDS Aux Tank,
    2019 310GK-R - Sailuns; MorRyde IS; Disc Brakes; 20K Reese Goosebox
    Search kalakamods for my mods


  5. #5
    New Member
    Join Date
    May 2021
    Location
    Wisconsin
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    RV Solitude 346FLS. - Here is the solution for others:

    1. Lift the Televator to the up position
    2. Remove 4 screws from both sides of the cabinet.
    3. Holding onto the cabinet - Lower the Televator
    The cabinet is now off and you will have access to the TV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

DISCLAIMER:This website is not affiliated with or endorsed by Grand Design RV, LLC or any of its affiliates. This is an independent site.