User Tag List
Results 21 to 24 of 24
-
02-15-2023, 09:48 PM #21
- Join Date
- Jan 2023
- Location
- Michigan
- Posts
- 29
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
When finished, 40" of the 44" drawers slide out. To save money I opted for the 40" instead of the 44" drawer slides. Here are the ones I bought.
Last edited by dmurdockrv; 02-16-2023 at 07:28 AM.
2022 Imagine 2400BH w/ ProPride 3P hitch 1000 lb WD
2021 RAM 1500 4x4 BigHorn w/ 3.92 rear axle gear ratio
-
02-15-2023, 11:23 PM #22
- Join Date
- Jan 2021
- Location
- Alberta, Canada
- Posts
- 35
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
Nice job and great stain work. You certainly have worked with wood before. I considered widening the stock opening but don’t have the staining skills or experience that you clearly do.
You now have a lot valuable storage. I’m curious, did you create a locking mechanism or do the slides have a built in lock to prevent the drawers from extending when traveling down the road and around corners?Last edited by EsquireRV; 02-15-2023 at 11:25 PM.
2021 Imagine 2400BH w/ Blue Ox Sway Pro 1000# WDH
Modifications: Goodyear Endurance 225/75R16 LRE, Road Armor w/ HD Wet Bolts, Dual 6V Trojan T105+
2015 F150 Lariat 5.0L V8 SCrew 6.5' 3.55
-
02-16-2023, 05:39 AM #23
- Join Date
- Jan 2023
- Location
- Michigan
- Posts
- 29
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
No locking mechanism. Since the drawers are perpendicular to the direction of motion I was hoping there would not be a lot of forces in the direction of the slides or bumps that make them slide out on their own. And once I installed them my concerns where further alleviated by how much resistance these drawer slides have already. They do not glide like you would experience with a kitchen drawer. They pretty much stop where ever I pull them out to. We'll see this summer when we travel if I was correct in my assumptions.
2022 Imagine 2400BH w/ ProPride 3P hitch 1000 lb WD
2021 RAM 1500 4x4 BigHorn w/ 3.92 rear axle gear ratio
-
03-15-2023, 03:10 PM #24
- Join Date
- Sep 2022
- Location
- Northern California
- Posts
- 6
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Dinette bench seat storage converted to full depth sliding drawer
Thanks for all the great ideas! I used a combo of them, built my own box but with a flush bottom and bull nose router the back edge. The box just slides on the carpet, no slides, used some furniture slides to protect the trim from getting beat up. Moved the clasp to the top for max width. Added some 2x2 wood guides inside but they weren’t really necessary.
Last edited by David_W; 03-15-2023 at 03:13 PM.
New Grand Designer Owner to be
Today, 01:11 AM in General Discussion