User Tag List
Thanks: 0
Likes: 0
Results 1 to 7 of 7
-
06-11-2022, 07:09 AM #1
- Join Date
- Oct 2017
- Location
- Innisfil, Ontario
- Posts
- 386
- Blog Entries
- 3
- Mentioned
- 4 Post(s)
- Tagged
- 1 Thread(s)
Two Sport Touring motorcycles in G series? (BMW R1200RT?) or two ultraglides?
Does anyone have a picture of one of the smaller G series (21G, 23G, 25G, 28G) with two motorcycles in the back? We’re looking to see if we can fit two sport touring motorcycles, in our case BMW R1200RT’s. It looks like we could fit them facing opposite directions in the models that have a kitchen slide but definitely doesn’t look like we could fit them facing the same direction.
in the ones with a full garage doesn’t look like it would be too much issue but still curious as the front bearings on these things are huge. I guess a similar would be if two Harley ultra glide’s would fit so even a picture of that would work.
It also looks like it’ll be quite the challenge to get that sucker up that ramp since we don’t have the low seating position like a cruiser has. May have to get creative with that especially if we had to put one in backwards. That would pretty much have to be a mini portable winch.
Thanks
Tim2022 Momentum 25G (aka "Baby Mo")
2020 Ram 3500 Laramie SRW | 6.7 HO Aisin | 6’4” bed | 3.73 gears | air suspension | 3694# Payload
Blog Post: 1500 Pickup’s and Towing - The REAL numbers with example
Blog Post: 2016-2018 Imagine 2800BH - 3500 lb Axles Tire Rubbing Issues
-
07-20-2022, 08:16 AM #2
- Join Date
- Oct 2017
- Location
- Innisfil, Ontario
- Posts
- 386
- Blog Entries
- 3
- Mentioned
- 4 Post(s)
- Tagged
- 1 Thread(s)
Well finally answered my own question, don’t think it will work lol! We just hauled our R1200RT for the first time and it pretty much eats the garage area even with both side panniers removed.
Hauled just fine however and we used the Warn “drill powered” winch to get it in first time (and remove from the wheel chock, wow that is tight). Now I just need to remove a nice rubber burn out patch on the floor lol, left a small mark trying to get it into the wheel chock oops. May switch to the Condor style since it looks like the entry to the chock is easier.2022 Momentum 25G (aka "Baby Mo")
2020 Ram 3500 Laramie SRW | 6.7 HO Aisin | 6’4” bed | 3.73 gears | air suspension | 3694# Payload
Blog Post: 1500 Pickup’s and Towing - The REAL numbers with example
Blog Post: 2016-2018 Imagine 2800BH - 3500 lb Axles Tire Rubbing Issues
-
07-20-2022, 11:36 AM #3
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,706
- Mentioned
- 59 Post(s)
- Tagged
- 0 Thread(s)
Yeah, the Condor chock is pretty much a snap to get in and out of. A little harder to get out as you have to rock it up and back, but not that big a deal. I do like it, and basically just strap the back down snugly, and the front end very lightly. Never had any issues.
We can put my Interceptor and Peggy's Spyder in ours, but that's a Momentum with an 11' garage, but even then, there isn't a lot of room left over.Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
-
07-20-2022, 12:21 PM #4
- Join Date
- Jan 2021
- Location
- Splendora TX
- Posts
- 614
- Mentioned
- 7 Post(s)
- Tagged
- 0 Thread(s)
Beautiful setup and a beautiful bike.
Randy and Kris
-
07-24-2022, 09:57 AM #5
-
07-25-2022, 07:42 AM #6
- Join Date
- Feb 2021
- Posts
- 571
- Mentioned
- 4 Post(s)
- Tagged
- 0 Thread(s)
Talking to a camper that was next to me, he showed me the Bike Binderz (https://www.bikebinderz.com/collecti...ure-bike-kit-2) system. He had a brand new trailer, and hadn't installed it yet, but he was saying on his last trailer, 30 seconds in and out. The way it is setup, it only works with bikes (dirt/adventure) with open spike pegs. I need to get under my trailer with the cover off, and see what I can or can not do.
2023 Chevy 3500HD CC SB 4x4 Dmax
2021 GD 320G with 8K axles
-
07-25-2022, 10:48 AM #7
- Join Date
- Jul 2021
- Location
- Platte City, MO
- Posts
- 4,706
- Mentioned
- 59 Post(s)
- Tagged
- 0 Thread(s)
I think I'd give that a pass, lots of stress, both up and down, on the footpegs and mounts. Maybe a dirt bike, but not a streetbike. JMO of course.
Howard and Peggy
2019 Momentum 351M, and 2018 RAM Cummins dually 6-speed.
His: 1999 Honda Interceptor
Hers: 2013 Spyder ST-S
Morryde Safe-T-rail install issues
Today, 12:55 AM in Mods and DIY