2022 Reflection 312BHTS,

[FT4NOW]

Another thought...what is the voltage reading on your battery? Have you ruled out a bad battery? I know you said some 12v components are working, but figured I should ask.

[5kagit]

Well turns out it wasn’t a ground. It’s the first hot/load wire in the circuit off the breaker. Gave her a tug where it goes up the wall while doing my last continuity test and finally got the beep! Now to just run a new wire should be fun.

Thanks for all y’all’s help!

[FT4NOW]

Well turns out it wasn’t a ground. It’s the first hot/load wire in the circuit off the breaker. Gave her a tug where it goes up the wall while doing my last continuity test and finally got the beep! Now to just run a new wire should be fun.

Thanks for all y’all’s help!

I'm not sure I understand. The breakers are for the 120v components, but you said you had issues with 12v components. Did you mean to say fuse vice breaker? If it was indeed a breaker, i dont see how that was the issue. Either way, glad you got it worked out.

[5kagit]

Haha… yes fuse not breaker.

[Rabbit]

IMO definitely a missing ground. 12 years in electrical engineering tells me that’s where to look. Might want to call GD CS and ask where grounds for affected items are.

[Rabbit]

You have a newer unit. Find the Compass Connect controller and inspect the ground connection as a starting point.