User Tag List
Thanks: 0
Likes: 0
Results 1 to 4 of 4
Thread: ProPride P3 #1400 Bars
-
07-16-2022, 02:56 PM #1
- Join Date
- Dec 2020
- Location
- Devon, PA
- Posts
- 27
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
ProPride P3 #1400 Bars
Used Pro Pride P3 has about 4000 miles on it. Bought new 3/21 was on a Momentum 21G. Old style leveling jacks, 2" receiver ext kit etc. Located in Philadelphia area (King of Prussia) PA. $1800.00. Worked great we are upgrading to a 5th wheel.
-
08-05-2022, 07:45 AM #2
- Join Date
- Dec 2020
- Location
- Devon, PA
- Posts
- 27
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
-
08-08-2022, 07:42 AM #3
- Join Date
- Jun 2022
- Location
- SF Bay Area
- Posts
- 1
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Curious and sort of need a favor….installed my PP on new 21G and the stinger sits about 4-5” higher than the 21G is level compared to the PP’s receiver box; top of coupler is 23.25” on a dead level 21G. With your setup how much higher, if at all, is your stinger above the box on the 21G. Great price for the hitch BTW, thanks.
-
08-08-2022, 08:06 AM #4
- Join Date
- Dec 2020
- Location
- Devon, PA
- Posts
- 27
- Mentioned
- 1 Post(s)
- Tagged
- 0 Thread(s)
Depends the truck but on my 150 it was about 3". I had two washers for the angle and probably should have done one more as the jacks were 7.5 inches when adjusted for travel and weight distribution. It was a great Hitch and made Towing soooo much easier!!!!! Good luck and hope that helps
Nightmare
Today, 06:37 AM in General Discussion