User Tag List
Thanks: 0
Results 1 to 4 of 4
Thread: Fastway e2 2nd attempt
-
07-24-2022, 03:17 PM #1
- Join Date
- May 2022
- Posts
- 47
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Fastway e2 2nd attempt
For the record, I have not been back to a cat scale yet. If you can remember i went to cat scale and appeared I was not transferring any weight. Not surprising as I noticed the washers weren’t installed. I took over installation and followed instructions to letter as best I could. With bars engaged the front end returned to basically same spot as pre hitch. Thing is I have to raise truck pretty high to get the bars engaged. Is that normal or could I be overdistributed. Thanks folks
-
07-24-2022, 03:24 PM #2
- Join Date
- Sep 2018
- Location
- Woodstock
- Posts
- 3,651
- Mentioned
- 60 Post(s)
- Tagged
- 0 Thread(s)
Definitely normal
My Sierra is almost off the ground for my bars to be easily snapped on
But without scale readings it is all a guess
Measurements are good but scales are best2021 Imagine 2400 BH
2018 GMC Sierra 4x4 Crew 1840lb payload
-
07-24-2022, 03:26 PM #3
- Join Date
- May 2022
- Posts
- 47
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Nbcanada to the rescue again
-
07-24-2022, 03:27 PM #4
- Join Date
- Sep 2018
- Location
- Woodstock
- Posts
- 3,651
- Mentioned
- 60 Post(s)
- Tagged
- 0 Thread(s)
I actually see more people with obvious incorrect wdh than correct ones
One guy behind me recently really was doing nothing with his hitch. I felt like telling him but figured why bother
He could put his bars on without any effort with truck and trailer level2021 Imagine 2400 BH
2018 GMC Sierra 4x4 Crew 1840lb payload
Wider Temperature Range Furrion...
Today, 10:46 PM in Mods and DIY