Power Inlet weather weatherproofing

[Tckhan]

One of the selling points of my trailer was the use of die cut seals for all the windows and doors. I was not amused when I removed the 50amp inlet during the course of a mod, and saw the lack of any caulking, or seals, other than the thin inlet oem seal. Two of the screws already had rust from water, which means the wall was getting moisture. I made sure to reattach with caulking. Check your seals.😃

[NB Canada]

My connector had water laying inside of it so I replaced it
Used butyl tape as well as the foam seal